Dell R210 II manual Bios

Dell

9 BIOS

9.1 Overview

The R210 II BIOS is based on the Insyde® BIOS core which supports the following features:

∙Simultaneous Multi-Threading (SMT) support

∙PCI 2.3 compliant

∙Plug and Play 1.0a compliant

∙MP (Multiprocessor) 1.4 compliant

∙Ability to boot from hard drive, optical drive, iSCSI drive, USB key, and SD card

∙ACPI 2.0 support (S0, OS-S4, S5 States)

∙PXE and WOL support for on-board NICs

∙SETUP access through <F2> key at end of POST

∙USB 2.0 (USB boot code is 1.1 compliant)

∙F1/F2 error logging in CMOS

∙Virtual KVM, CD, and floppy support

∙iDRAC supported

∙Unified Server Configurator (UEFI 2.1) support

∙Power management support including DBS, Power Inventory and multiple Power Profiles: o Maximum Performance

o OS Control (DBS) o Custom

∙SMBIOS 2.5

∙PCI-to-PCI bridge 1.0 compliant

∙Dell Server Assistant 7.0 support

∙System Service support

∙Onboard PCI video BIOS support

∙SATA-enabled for CD-ROM and hard drives

∙PCI FW 3.0 compliant

∙Selectable Boot support

∙El Torito CD-ROM Boot 1.0

∙Remote BIOS Update support

∙Remote Configuration Interface (RCI) support

∙Console redirection through COM1

∙PXE support based on Preboot Execution Environment Specification v2.1

∙2-byte ID support

∙ePPID support in flash

∙Memory remapping support

∙DDR3 UDIMM memory support

∙UEFI shell Support

∙AC recovery staggering Power-Up

∙DIMM mismatch checking

∙VT-d

The PowerEdge R210 II BIOS does not support the following:

∙BIOS language localization

∙BIOS recovery after bad flash

∙RIB Support

32

PowerEdge R210 II Technical Guide