Dell dell power vault md3200 and md3220 storage arrays manual Technical Specifications

Technical Specifications

Drives

PowerVault MD3200	Up to twelve 3.5-inch SAS hot-swappable
	hard drives (3.0 Gbps and 6.0 Gbps)
PowerVault MD3220	Up to twenty four 2.5-inch SAS hot-swappable
	hard drives (3.0 Gbps and 6.0 Gbps)
RAID Controller Modules
RAID controller modules	• One or two hot-swappable modules with
	temperature sensors
	• 2 GB of cache per controller

Back-Panel Connectors (Per RAID Controller Module)

SAS connectors	• Four SAS IN ports to connect hosts
	• One SAS OUT port for expansion to an additional
	PowerVault MD1200 series enclosure
	NOTE: SAS connectors are SFF-8088 compliant.
Serial connector	One 6-pin mini-DIN connector
	NOTE: For technical support use only.
Management Ethernet	One 100/1000 Base-T port Ethernet for out-of-band
connector	management of the enclosure
	NOTE: The default management port IP addresses for
	the primary and secondary RAID controller modules
	are 192.168.128.101 and 192.168.128.102, respectively.
	By default, the management ports are set to Dynamic
	Host Configuration Protocol (DHCP). If the controller
	is unable to get an IP address configuration from
	a DHCP server within a specified time out period
	(approximately 3 minutes), it defaults back to
	static IP addressing. For more information,
	see the Deployment Guide.

12

Getting Started With Your System