Dell dell power vault md3200 and md3220 storage arrays manual Before You Begin

Before You Begin

NOTE: Throughout the document, Dell PowerVault MD3200 series storage array refers to both Dell PowerVault MD3200 and Dell PowerVault MD3220. Dell PowerVault MD1200 series expansion enclosure refers to both Dell PowerVault MD1200 and Dell PowerVault MD1220.

Before setting up your Dell PowerVault MD3200 series storage array, you must consider certain best practices to ensure that your storage array operates at maximum efficiency and offers full redundancy (if required).

•Throughout the network, always use a Category 5e (or higher) Ethernet cable.

•Before connecting any cables between the host server and storage array, physically label each port and connector.

•Always follow proper power-up and power-down procedures when cycling power across the network. You must also ensure that critical network components are on separate power circuits.

Other Documentation and Media You May Need

WARNING: See the safety and regulatory information that shipped with your system. Warranty information may be included within this document or as a separate document.

NOTE: All PowerVault MD3200 series documents are available at support.dell.com/manuals.

•The rack documentation included with your rack solution describes how to install your system into a rack.

•The Owner’s Manual provides information about system features and describes how to troubleshoot the system and install or replace system components.

•The Deployment Guide provides information about installing and configuring the software and hardware.

•The CLI Guide provides information about using the command line interface (CLI) to configure and manage your storage array.

Getting Started With Your System

3