Apple G3 manual Ethernet port

Page 27

To connect your Macintosh to a centralized 10/100 twisted-pair network, follow these steps:

1Plug one end of an RJ-45 twisted-pair cable into the Ethernet port on your Macintosh.

2Plug the other end of the cord into an RJ-45 wall outlet or external hub that is connected to a twisted-pair Ethernet network.

Ethernet port	RJ-45 wall plate	10/100 Ethernet hub
(10/100 twisted-pair
Ethernet)

10/100 twisted-pair Ethernet cable

4-port Ethernet card (10/100 twisted-pair Ethernet)

Note: The cable length from your computer’s Ethernet port to a network hub should not exceed 100 meters. Check with your network administrator if you have a question about the cable length from your computer to the network hub.

After you start up the computer, you need to conﬁgure the software for your network connection. Your network administrator can provide the necessary information. You can also get help conﬁguring your network software using the electronic documentation that came with your computer.

Setting Up 27

Image 27

Contents

Setting Up Your Apple Computer, Inc. All rights reserved Apple Computer, IncContents Health-Related Information About Computer Use Expansion Card Power RequirementsInstalling a Hard Disk or Other Internal Storage Device Problems With an Apple USB Mouse or KeyboardCleaning the Mouse Locking and Unlocking the Mouse Power SupplyCommunications Regulation Information Laser Information Page Introducing the Macintosh Server G3 Software Features Hardware and Software FeaturesNetBoot server software WebObjects Enterprise Developer Hardware FeaturesPPP Point-to-Point Protocol or Internet connection via modem Hardware and Software Limitations in Mac OS X ServerSometimes built into the monitor Positioning the Computer Setting UpYour Server at a Glance Works with CD-ROM discs Your Server’s Ports and Connectors This feature is not supported by Mac OS X Server Plugging In the Server 115 Power cord socket Power cord plug Monitor power socket Monitor port Monitor power cord Connecting a MonitorMonitor port on the computer Mac-to-VGA adapter Connecting the Mouse and the Keyboard to the Server Apple USB keyboard Apple USB mouse You can remove the film USB ports on keyboardConnecting to an Ethernet Network To four networks Ethernet port Port There are three sets of LED indicators on your ethernet cardSecuring the Server What’s NextSecurity lock port Page Working Inside the Server About Memory BatteryAbout Internal Storage Options Dram ConfigurationsCD-ROM drive bay About PCI Expansion Cards Additional Wide Ultra2 Scsi DrivesOther Types of Scsi Drives Expansion Card Power Requirements About the Server’s BatteryOpening the Server Touch the metal portion of the PCI port access cover Dram Installing Dram Connectors Notches Dram Dimm Your DIMM’s shape and components may varyWill automatically close Ejector Installing a Hard Disk or Other Internal Storage Device Unplug the power cord bundle From the main logic boardSide view Chapter Unscrew the drive carrier retainer and remove it Chapter Scsi terminator Chapter Replace the drive carrier retainer and screw it down Plug the power cord bundles into the hard disk drives Into the main logic board Plug the power cord bundle backPort access cover Installing a PCI Expansion CardConnector New battery Replacing the Battery on Replacing the Battery Closing the Server Squeeze the side panel until it snaps securely into place Page Turn on the monitor Setting Up Your Server and Turning It OnKeyboard power button Computer power button Turning the Server Off Problems Turning Your Server On?Problems With an Apple USB Mouse or Keyboard Restoring Your Server’s Software Using the Server Without a MonitorRestoring in Place Before you begin the restore process, do the followingStart up your computer from the software restore CD Before Restoring Your SoftwareErasing Your Hard Disk Page Health-Related Information About Computer Use Health, Safety, and MaintenanceEye Fatigue Musculoskeletal DiscomfortArranging Your Work Area Avoiding Fatigue Shoulders relaxedThighs horizontal What About Electromagnetic Emissions? Safety InstructionsHandling Your Computer Equipment Health, Safety, and Maintenance On discs Do not scratch To avoid damage to your discs, keep these points in mindDo not expose discs To direct sunlight On discs Do not spill liquidsEmergency ejection hole Cleaning Your EquipmentPower Supply Cleaning the Computer CaseCleaning the Mouse Cleaning the MonitorInsert a straightened paper clip into this hole Locking and Unlocking the MouseTo unlock the mouse, follow these steps

Related manuals

Manual 210 pages 31.8 Kb

Manual 30 pages 35 Kb

Manual 275 pages 34.76 Kb

Manual 275 pages 31.51 Kb

Manual 210 pages 29.86 Kb