Apple G3 manual Turning the Server Off, Problems Turning Your Server On?

Page 61

5The next time you start up your computer, you may need to enter your login name and password into the login window, depending on the options you selected in the Setup Assistant.

Turning the Server Off

1In the Workspace Manager, open the File menu and choose Log Out. A message appears.

2Click Power Off.

To turn the computer on again, just press the Power button (®) on the keyboard.

Important Do not use the switch on a power strip to turn the computer off unless you can’t turn it off with the Power button or the Power Off command. Your files or system software could be damaged if your computer is not shut down properly.

Also, the only way to completely disconnect power from the computer is by unplugging one end of the power cord from the outlet or power strip or from the back of the computer.

If you have problems turning the server on or off, see the Mac OS X Server Installation Manual that came with your server.

Problems Turning Your Server On?

If after a few moments you don’t see anything on your screen or you think your computer did not start up properly, check these items to see if you can identify the problem:

mIs the computer plugged into a power source? If it is plugged into a power strip, is the power strip turned on?

mAre the keyboard cables connected correctly?

Warning Don’t connect or disconnect an ADB cable while the computer is on. You could damage your equipment. If a loose ADB connection is the problem, turn off the computer by pressing its front panel Power button.

mDo you see the green power-on light on the front panel of the computer?

Starting Up Your Server 61

Page 60 Page 62
Image 61
Page 60 Page 62
Contents Setting Up Your Apple Computer, Inc. All rights reserved Apple Computer, IncContents Installing a Hard Disk or Other Internal Storage Device Expansion Card Power RequirementsProblems With an Apple USB Mouse or Keyboard Health-Related Information About Computer UseCleaning the Mouse Locking and Unlocking the Mouse Power SupplyCommunications Regulation Information Laser Information Page Introducing the Macintosh Server G3 NetBoot server software WebObjects Enterprise Developer Hardware and Software FeaturesHardware Features Software FeaturesPPP Point-to-Point Protocol or Internet connection via modem Hardware and Software Limitations in Mac OS X ServerSometimes built into the monitor Positioning the Computer Setting UpYour Server at a Glance Works with CD-ROM discs Your Server’s Ports and Connectors This feature is not supported by Mac OS X Server Plugging In the Server 115 Power cord socket Power cord plug Monitor power socket Monitor port Monitor power cord Connecting a MonitorMonitor port on the computer Mac-to-VGA adapter Connecting the Mouse and the Keyboard to the Server Apple USB keyboard Apple USB mouse You can remove the film USB ports on keyboardConnecting to an Ethernet Network To four networks Ethernet port Port There are three sets of LED indicators on your ethernet cardWhat’s Next Securing the ServerSecurity lock port Page Working Inside the Server About Memory BatteryAbout Internal Storage Options Dram ConfigurationsCD-ROM drive bay Additional Wide Ultra2 Scsi Drives About PCI Expansion CardsOther Types of Scsi Drives Expansion Card Power Requirements About the Server’s BatteryOpening the Server Touch the metal portion of the PCI port access cover Dram Installing Dram Dram Dimm Your DIMM’s shape and components may vary Connectors NotchesWill automatically close Ejector Installing a Hard Disk or Other Internal Storage Device From the main logic board Unplug the power cord bundleSide view Chapter Unscrew the drive carrier retainer and remove it Chapter Scsi terminator Chapter Replace the drive carrier retainer and screw it down Plug the power cord bundles into the hard disk drives Into the main logic board Plug the power cord bundle backPort access cover Installing a PCI Expansion CardConnector New battery Replacing the Battery on Replacing the Battery Closing the Server Squeeze the side panel until it snaps securely into place Page Turn on the monitor Setting Up Your Server and Turning It OnKeyboard power button Computer power button Turning the Server Off Problems Turning Your Server On?Problems With an Apple USB Mouse or Keyboard Restoring Your Server’s Software Using the Server Without a MonitorStart up your computer from the software restore CD Before you begin the restore process, do the followingBefore Restoring Your Software Restoring in PlaceErasing Your Hard Disk Page Health-Related Information About Computer Use Health, Safety, and MaintenanceEye Fatigue Musculoskeletal DiscomfortArranging Your Work Area Shoulders relaxed Avoiding FatigueThighs horizontal What About Electromagnetic Emissions? Safety InstructionsHandling Your Computer Equipment Health, Safety, and Maintenance Do not expose discs To avoid damage to your discs, keep these points in mindTo direct sunlight On discs Do not spill liquids On discs Do not scratchPower Supply Cleaning Your EquipmentCleaning the Computer Case Emergency ejection holeCleaning the Mouse Cleaning the MonitorInsert a straightened paper clip into this hole Locking and Unlocking the MouseTo unlock the mouse, follow these steps
Related manuals
Manual 210 pages 31.8 Kb Manual 30 pages 35 Kb Manual 275 pages 34.76 Kb Manual 275 pages 31.51 Kb Manual 210 pages 29.86 Kb

G3 specifications

The Apple G3, introduced in 1997, marked a significant leap in Apple's computer technology and design philosophy. This series of Macintosh computers was powered by the PowerPC G3 processor, which had a clock speed ranging from 233 MHz to 750 MHz, depending on the model. The G3 chip was notable for its advanced features, including a 32 KB L1 cache and the ability to support a more complex 256 KB L2 cache. This allowed the machines to execute instructions more efficiently than their predecessors, enhancing overall performance for various computing tasks.

One of the defining characteristics of the Apple G3 line was its innovative design, which combined form and function. The desktop models featured a sleek, curving case, famously known as the "Blue and White" G3, while the all-in-one iMac G3 showcased vibrant colors and an iconic translucent design that became a hallmark of Apple devices.

The Apple G3 was notable for its extensive use of USB ports, which was a relatively new technology at the time. This foresight helped pave the way for the adoption of USB peripherals, allowing users to connect a wide range of devices, from printers to scanners, with ease. Additionally, the G3 series also provided options for expansion via PCI slots, giving users the flexibility to upgrade their systems.

In terms of graphics, the G3 models were equipped with accelerators like the ATI Rage or the NVIDIA Riva TNT, providing improved visual performance for both professional applications and gaming. This was complemented by Apple's decision to support higher screen resolutions and better color depth, enhancing the multimedia experience.

Moreover, the Apple G3 introduced the Mac OS 8 operating system, which brought improved multitasking capabilities and a more streamlined user interface. This allowed users to experience a more intuitive and productive computing environment.

Overall, the Apple G3 line represented a critical evolution in Macintosh technology. It combined powerful processing, innovative design, and new technologies that set the stage for future developments in the Apple ecosystem. The G3 series not only solidified Apple’s presence in the computing market but also laid the foundation for the modern computing experience that would follow in the ensuing years.
Top Page Image Contents