Apple G3 manual Scsi terminator

Page 47

6Screw the drive onto the carrier assembly with the drive’s connectors facing away from the sheet metal side of the carrier.

Position the hard disk drive on the drive carrier so that the ribbon cable connector and the power cord connector are accessible.

Screw the drive into position with the four screws supplied with it.

SCSI terminator

Attach this ribbon cable plug to the ribbon cable connector on the hard disk drive.

mIf you are adding an additional Wide Ultra2 SCSI drive, attach it to the open position on the carrier, then connect the data ribbon cable to it.

The SCSI cable included with factory-installed SCSI drives has a built-in terminator block, so you don’t need to attach a terminator to the last device in the chain.

To use a type of SCSI device other than Wide Ultra2, it’s best to add a PCI card that supports the device. The factory-installed Wide Ultra2 SCSI card supports some other types of SCSI devices, but not optimally (the use of Wide Ultra SCSI devices will slow down the bus speed to the slowest drive). For information on PCI card installation, see the section “Installing a PCI Expansion Card” on page 52, and then return to step 7 in this section.

Working Inside the Server

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Setting Up Your Apple Computer, Inc. All rights reserved Apple Computer, IncContents Health-Related Information About Computer Use Expansion Card Power RequirementsInstalling a Hard Disk or Other Internal Storage Device Problems With an Apple USB Mouse or KeyboardCleaning the Mouse Locking and Unlocking the Mouse Power SupplyCommunications Regulation Information Laser Information Page Introducing the Macintosh Server G3 Software Features Hardware and Software FeaturesNetBoot server software WebObjects Enterprise Developer Hardware FeaturesPPP Point-to-Point Protocol or Internet connection via modem Hardware and Software Limitations in Mac OS X ServerSometimes built into the monitor Positioning the Computer Setting UpYour Server at a Glance Works with CD-ROM discs Your Server’s Ports and Connectors This feature is not supported by Mac OS X Server Plugging In the Server 115 Power cord socket Power cord plug Monitor power socket Monitor port Monitor power cord Connecting a MonitorMonitor port on the computer Mac-to-VGA adapter Connecting the Mouse and the Keyboard to the Server Apple USB keyboard Apple USB mouse You can remove the film USB ports on keyboardConnecting to an Ethernet Network To four networks Ethernet port Port There are three sets of LED indicators on your ethernet cardSecurity lock port Securing the ServerWhat’s Next Page Working Inside the Server About Memory BatteryAbout Internal Storage Options Dram ConfigurationsCD-ROM drive bay Other Types of Scsi Drives About PCI Expansion CardsAdditional Wide Ultra2 Scsi Drives Expansion Card Power Requirements About the Server’s BatteryOpening the Server Touch the metal portion of the PCI port access cover Dram Installing Dram Will automatically close Ejector Connectors NotchesDram Dimm Your DIMM’s shape and components may vary Installing a Hard Disk or Other Internal Storage Device Side view Unplug the power cord bundleFrom the main logic board Chapter Unscrew the drive carrier retainer and remove it Chapter Scsi terminator Chapter Replace the drive carrier retainer and screw it down Plug the power cord bundles into the hard disk drives Into the main logic board Plug the power cord bundle backPort access cover Installing a PCI Expansion CardConnector New battery Replacing the Battery on Replacing the Battery Closing the Server Squeeze the side panel until it snaps securely into place Page Turn on the monitor Setting Up Your Server and Turning It OnKeyboard power button Computer power button Turning the Server Off Problems Turning Your Server On?Problems With an Apple USB Mouse or Keyboard Restoring Your Server’s Software Using the Server Without a MonitorRestoring in Place Before you begin the restore process, do the followingStart up your computer from the software restore CD Before Restoring Your SoftwareErasing Your Hard Disk Page Health-Related Information About Computer Use Health, Safety, and MaintenanceEye Fatigue Musculoskeletal DiscomfortArranging Your Work Area Thighs horizontal Avoiding FatigueShoulders relaxed What About Electromagnetic Emissions? Safety InstructionsHandling Your Computer Equipment Health, Safety, and Maintenance On discs Do not scratch To avoid damage to your discs, keep these points in mindDo not expose discs To direct sunlight On discs Do not spill liquidsEmergency ejection hole Cleaning Your EquipmentPower Supply Cleaning the Computer CaseCleaning the Mouse Cleaning the MonitorInsert a straightened paper clip into this hole Locking and Unlocking the MouseTo unlock the mouse, follow these steps
Related manuals
Manual 210 pages 31.8 Kb Manual 30 pages 35 Kb Manual 275 pages 34.76 Kb Manual 275 pages 31.51 Kb Manual 210 pages 29.86 Kb

G3 specifications

The Apple G3, introduced in 1997, marked a significant leap in Apple's computer technology and design philosophy. This series of Macintosh computers was powered by the PowerPC G3 processor, which had a clock speed ranging from 233 MHz to 750 MHz, depending on the model. The G3 chip was notable for its advanced features, including a 32 KB L1 cache and the ability to support a more complex 256 KB L2 cache. This allowed the machines to execute instructions more efficiently than their predecessors, enhancing overall performance for various computing tasks.

One of the defining characteristics of the Apple G3 line was its innovative design, which combined form and function. The desktop models featured a sleek, curving case, famously known as the "Blue and White" G3, while the all-in-one iMac G3 showcased vibrant colors and an iconic translucent design that became a hallmark of Apple devices.

The Apple G3 was notable for its extensive use of USB ports, which was a relatively new technology at the time. This foresight helped pave the way for the adoption of USB peripherals, allowing users to connect a wide range of devices, from printers to scanners, with ease. Additionally, the G3 series also provided options for expansion via PCI slots, giving users the flexibility to upgrade their systems.

In terms of graphics, the G3 models were equipped with accelerators like the ATI Rage or the NVIDIA Riva TNT, providing improved visual performance for both professional applications and gaming. This was complemented by Apple's decision to support higher screen resolutions and better color depth, enhancing the multimedia experience.

Moreover, the Apple G3 introduced the Mac OS 8 operating system, which brought improved multitasking capabilities and a more streamlined user interface. This allowed users to experience a more intuitive and productive computing environment.

Overall, the Apple G3 line represented a critical evolution in Macintosh technology. It combined powerful processing, innovative design, and new technologies that set the stage for future developments in the Apple ecosystem. The G3 series not only solidified Apple’s presence in the computing market but also laid the foundation for the modern computing experience that would follow in the ensuing years.
Top Page Image Contents