Apple G3 manual Using the Server Without a Monitor, Restoring Your Server’s Software

Page 63

Using the Server Without a Monitor

1Follow all the steps described earlier to set up your computer, including connecting a monitor, mouse, and keyboard.

2Configure your server software.

Be sure network services are operating properly.

3Turn off the server, then disconnect the monitor.

4Make sure that the Mac-to-VGA adapter (that came with your computer) is connected to the monitor port.

5Turn on the computer.

Follow the instructions that came with your remote access software for logging in to and controlling the computer.

Follow the instructions supplied with the locking cable to secure it to your computer. When you install the locking cable, feed the cable through the lockable latch on the cover to prevent memory, disk drives, and expansion cards from being removed.

Security cables that connect to the built-in security lock port are available from other manufacturers. See your Apple-authorized dealer for more information.

Restoring Your Server’s Software

If you are having problems with the system software or applications that came with your computer and you want your computer to have its original system software, factory settings, and applications, you can use the software restore CD that came with your computer. The restore CD contains the Apple Software Restore application, which lets you restore all your original software, including the system software, factory settings, and applications that came with your computer. You have the option of erasing your hard disk before restoring the original software, or just replacing the original software (Restore In Place).

Starting Up Your Server 63

Page 62 Page 64
Image 63
Page 62 Page 64
Contents Setting Up Your Apple Computer, Inc. All rights reserved Apple Computer, IncContents Health-Related Information About Computer Use Expansion Card Power RequirementsInstalling a Hard Disk or Other Internal Storage Device Problems With an Apple USB Mouse or KeyboardCleaning the Mouse Locking and Unlocking the Mouse Power SupplyCommunications Regulation Information Laser Information Page Introducing the Macintosh Server G3 Software Features Hardware and Software FeaturesNetBoot server software WebObjects Enterprise Developer Hardware FeaturesPPP Point-to-Point Protocol or Internet connection via modem Hardware and Software Limitations in Mac OS X ServerSometimes built into the monitor Positioning the Computer Setting UpYour Server at a Glance Works with CD-ROM discs Your Server’s Ports and Connectors This feature is not supported by Mac OS X Server Plugging In the Server 115 Power cord socket Power cord plug Monitor power socket Monitor port Monitor power cord Connecting a MonitorMonitor port on the computer Mac-to-VGA adapter Connecting the Mouse and the Keyboard to the Server Apple USB keyboard Apple USB mouse You can remove the film USB ports on keyboardConnecting to an Ethernet Network To four networks Ethernet port Port There are three sets of LED indicators on your ethernet cardSecuring the Server What’s NextSecurity lock port Page Working Inside the Server About Memory BatteryAbout Internal Storage Options Dram ConfigurationsCD-ROM drive bay About PCI Expansion Cards Additional Wide Ultra2 Scsi DrivesOther Types of Scsi Drives Expansion Card Power Requirements About the Server’s BatteryOpening the Server Touch the metal portion of the PCI port access cover Dram Installing Dram Connectors Notches Dram Dimm Your DIMM’s shape and components may varyWill automatically close Ejector Installing a Hard Disk or Other Internal Storage Device Unplug the power cord bundle From the main logic boardSide view Chapter Unscrew the drive carrier retainer and remove it Chapter Scsi terminator Chapter Replace the drive carrier retainer and screw it down Plug the power cord bundles into the hard disk drives Into the main logic board Plug the power cord bundle backPort access cover Installing a PCI Expansion CardConnector New battery Replacing the Battery on Replacing the Battery Closing the Server Squeeze the side panel until it snaps securely into place Page Turn on the monitor Setting Up Your Server and Turning It OnKeyboard power button Computer power button Turning the Server Off Problems Turning Your Server On?Problems With an Apple USB Mouse or Keyboard Restoring Your Server’s Software Using the Server Without a MonitorRestoring in Place Before you begin the restore process, do the followingStart up your computer from the software restore CD Before Restoring Your SoftwareErasing Your Hard Disk Page Health-Related Information About Computer Use Health, Safety, and MaintenanceEye Fatigue Musculoskeletal DiscomfortArranging Your Work Area Avoiding Fatigue Shoulders relaxedThighs horizontal What About Electromagnetic Emissions? Safety InstructionsHandling Your Computer Equipment Health, Safety, and Maintenance On discs Do not scratch To avoid damage to your discs, keep these points in mindDo not expose discs To direct sunlight On discs Do not spill liquidsEmergency ejection hole Cleaning Your EquipmentPower Supply Cleaning the Computer CaseCleaning the Mouse Cleaning the MonitorInsert a straightened paper clip into this hole Locking and Unlocking the MouseTo unlock the mouse, follow these steps
Related manuals
Manual 210 pages 31.8 Kb Manual 30 pages 35 Kb Manual 275 pages 34.76 Kb Manual 275 pages 31.51 Kb Manual 210 pages 29.86 Kb

G3 specifications

The Apple G3, introduced in 1997, marked a significant leap in Apple's computer technology and design philosophy. This series of Macintosh computers was powered by the PowerPC G3 processor, which had a clock speed ranging from 233 MHz to 750 MHz, depending on the model. The G3 chip was notable for its advanced features, including a 32 KB L1 cache and the ability to support a more complex 256 KB L2 cache. This allowed the machines to execute instructions more efficiently than their predecessors, enhancing overall performance for various computing tasks.

One of the defining characteristics of the Apple G3 line was its innovative design, which combined form and function. The desktop models featured a sleek, curving case, famously known as the "Blue and White" G3, while the all-in-one iMac G3 showcased vibrant colors and an iconic translucent design that became a hallmark of Apple devices.

The Apple G3 was notable for its extensive use of USB ports, which was a relatively new technology at the time. This foresight helped pave the way for the adoption of USB peripherals, allowing users to connect a wide range of devices, from printers to scanners, with ease. Additionally, the G3 series also provided options for expansion via PCI slots, giving users the flexibility to upgrade their systems.

In terms of graphics, the G3 models were equipped with accelerators like the ATI Rage or the NVIDIA Riva TNT, providing improved visual performance for both professional applications and gaming. This was complemented by Apple's decision to support higher screen resolutions and better color depth, enhancing the multimedia experience.

Moreover, the Apple G3 introduced the Mac OS 8 operating system, which brought improved multitasking capabilities and a more streamlined user interface. This allowed users to experience a more intuitive and productive computing environment.

Overall, the Apple G3 line represented a critical evolution in Macintosh technology. It combined powerful processing, innovative design, and new technologies that set the stage for future developments in the Apple ecosystem. The G3 series not only solidified Apple’s presence in the computing market but also laid the foundation for the modern computing experience that would follow in the ensuing years.
Top Page Image Contents