GSS Series User Manual
3.2 Configuration
3.2.1 System Information
The System Information configuration page is used to display basic switch information including the Model Name, MAC Address, Firmware Version, Hardware Version, IP and SNMP information.
Fig. 3.2
System Desc: Displays a brief description of the switch. (Read Only)
F/W Version: Displays the current firmware loaded into the switch. (Read Only)
H/W Version: Displays the current hardware version. (Read Only)
MAC Address: Displays the MAC Address of the switch. (Read Only)
Serial Number: Displays the serial number of the switch. (Read Only)
Active IP Add: Displays the current IP address of the switch. (Read Only)
Active Sub Mask: Displays the current subnet mask of the switch. (Read Only)
Active Gateway: Displays the current Default Gateway. (Read Only)
DHCP Server: Displays the IP address of the DHCP Server. (Read Only)
Lease Time: Displays the amount of time left in the DHCP lease period. (Read Only)
Device Name: Enter the device name in the space provided.
DHCP Enabled: Used to enable the DHCP client on the switch. If you have a DHCP Server running on your network and you want the switch to have a dynamic IP Address, enable this feature.
IP Address: If you are not using the DHCP client and want to configure a static IP Address into the switch, enter it here.
Subnet Mask: Enter a valid subnet mask into the space provided.
Gateway: Enter a valid gateway address into the space provided.
Alloy Computer Products Pty Ltd Copyright ©2007
16