GSS Series User Manual
3.2.13 Rate Limit
The Rate Limit function of the GSS Series is used to limit the speed of each port on the switch.
Fig. 3.24
Traffic Rate Unit: Is used to select the incremental value of the rate limit. You can set a rate limit based on 128K, 512K, 1M, 10M or 32M. If you select 128K you can then select a rate value for each port. If the rate value is set to 1, the port will be limited to 128K. If the rate limit is set to 2 then the port will be limited to 256K.
Ingress: Select the ingress rate value from the drop down box provided. As stated above the rate limit value is multiplied by the Traffic rate unit to give you the total ingress speed.
Egress: Select the egress rate value from the drop down box provided. As stated above the rate limit value is multiplied by the Traffic rate unit to give you the total ingress speed.
Apply Button: The Apply button must be pressed after making any changes to any of the values on this screen.
Refresh Button: Used to refresh the current settings displayed on the screen.
Alloy Computer Products Pty Ltd Copyright ©2007
40