GSS Series User Manual
3.2.12 Filter
The filtering function of the GSS Series is used to block unwanted devices from accessing the switch. The filtering rules are based on an IP Address, both static and dynamic IP addressing can be used.
Fig. 3.23
Port:Is the physical port number of the switch.
Mode:Used to disable or enable the filtering function. Either static or dynamic IP addressing can be selected here.
IP Address: If using a static IP address, enter the IP address here. If using dynamic an IP address will appear once an IP address has been assigned to the device connected to this port.
IP Mask: If using a static IP address, enter the subnet mask here.
DHCP Server: Tick the check box to allow DHCP Servers to use this port.
Apply Button: The Apply button must be pressed after making any changes to any of the values on this screen.
Refresh Button: Used to refresh the current settings displayed on the screen.
Alloy Computer Products Pty Ltd Copyright ©2007
39