Spectra Logic T680, T-FINITY, T380, T200 manual Back of the library T950 shown

Page 12

Replace or Install a Drive

Spectra T950 or T-FinityThe drives are shielded by protective doors.

Note: Opening the library’s rear doors causes the robotics to slow down. They resume normal speed when the doors are closed again. Operation of the rest of the library is unaffected by the opening and closing of the rear doors.

1.Locate the door lock on the back of the library.

2.Lift the lock and turn it either direction to disengage it and open the library doors.

2. Turn

1. Lift

Empty Drive drive bay

Figure 7 The back of the library (T950 shown).

12

Drive Installation or Replacement Instructions

91010010

Image 12

Contents Spectra T200, T380, T680, T950, and T-Finity Copyright Part Number Revision History Drive Installation or Replacement Instructions Continuing or Stopping Backups Prepare for MaintenanceEnsuring ESD Protection Gathering Tools and Supplies Identify the Drive LocationSpectra T200, T380, or T680 Library Back panel drive locations and their identifiers T380 shownSpectra T950 or T-Finity Library Replace or Install a Drive Drive Replacement PreparationPreparing the Library Select Configuration Drives. The Drives screen displays Accessing the Drives Drive Installation PreparationRear panel cover and screws T380 shown Back of the library T950 shown Removing the Malfunctioning Drive Releasing the drive lockInstalling the Drive Releasing the drive lock and removing the driveRemove the drive from its protective packaging Installing the drive sled into the library Connecting the Cables Complete the ProcedureDaisy-Chain Direct-Attach Scsi Drives Complete the Procedure May Connect the Scsi Cables Connect the Fibre Channel CablesInstalling the Cover or Securing the Rear Door Testing the DriveAdding the Drive to a Partition Restarting Backups Return ProceduresReturn the Component Return Guidelines