Preparing the Library
3.Select Configuration > Drives. The Drives screen displays.
Figure 2 The Drives screen.
Note: The individual drive types are identified by:
fLTO refers to Fibre Channel.
LTO refers to SCSI.
4.Based on the drive identifier you determined in Identify the Drive Location on page 5, select Replace for the drive that you want to replace.
Do not select Remove. This option permanently removes the drive from the Caution partition. When the replacement drive is installed, it will not be assigned to the
partition from which the malfunctioning drive was removed.
If you select Remove and the selected drive is the only drive in the partition, the partition will be deleted.
A Feedback Required screen prompts you to confirm that you want to replace the drive.
5.Select OK.
Another Feedback Required screen indicates that the requested drive has been successfully shut down.
Important Do not respond to the prompt in the Feedback Required screen or perform any other operations from the user interface (either locally or remotely) until you
complete the replacement procedure. Responding before you replace the drive will power on and configure the drive you just powered down.
May 2010 | Spectra T200, T380, T680, T950, or |
9