Spectra Logic T950, T-FINITY, T680, T380, T200 manual Installing the drive sled into the library

Replace or Install a Drive

Figure 11 Installing the drive sled into the library.

Notes: ƒ Both the T950 and the T‐Finity require a QIP for direct‐attach drive configurations.

ƒYour tape drive may look slightly different than the tape drives shown in this document.

4.Return to the Feedback Required screen displayed on the user interface (see Step 4 on page 10 for a replacement drive or Step 5 on page 9 for a new drive) and select OK.

The process depends on whether you are installing a new drive or replacing a drive.

ƒReplacement drive—The library powers on the new drive and begins the process of configuring it. A window displays showing the progress.

ƒNew drive—If you installed a new drive, you need to add the new drive to a partition before it can be used (see Adding the Drive to a Partition on page 21).

16

Drive Installation or Replacement Instructions 91010010