CHAPTER 1: Hardware Descriptions
lights labeled 10 and 100. These LEDs indicate the speed of traffic being transmitted.
High Availability Status LED
Indicates the current status of this appliance, if it is one of two connected as a high-availability system. If this is the primary appliance, and the light is on and steady, the system is functional, and this appliance is on-line. If this is the primary appliance and the LED is blinking, a failover has occurred and the secondary appliance is online.
High Availability Interfaces
Two Ethernet interfaces, labelled HA2 and HA1 enable you to connect with a cross-over Ethernet cable to other High Availability-ready Firebox Vclass appliances for failover (backup) protection. Incorporated into the two high-availability Ethernet ports are two indicator lights labeled 10 and 100. These LEDs indicate the speed traffic is transmitted.
Console Interface
Asingle RJ-45 interface, labeled Console, permits a direct workstation-to-appliance connection. You can use the WatchGuard Command Line Interface (CLI) to configure and administer this appliance. For more information about this administrative option, see the CLI Guide.
Ready
Blinks when the appliance is powering up. Illuminates when the appliance is ready for network traffic.
Admin
Illuminates when a system administrator is connected to the appliance by means of the Vcontroller or the WatchGuard CLI.
