WatchGuard Technologies V100 Reset port, Power LED, AC Power Cord, Power Supply Switch, UPS Port

Page 17

Front and Back Views

Alarm

Illuminates when certain alarms are triggered. For more information on alarms, see the Firebox Vclass User Guide.

Reset port

This opening allows you to insert a straight pin or paperclip and press an internal reset switch that restarts the appliance.

Power LED

Illuminates when the appliance has been turned on.

The back panel of a Firebox V60, V60L, or V80 contains the features shown in the following illustration.

Power supply switch

AC Power cord

"UPS" port

AC Power Cord

Enables you to connect the appliance (using the supplied power cord) to a 100 to 240VAC (50/ 60Hz) power source.

NOTE

Do not connect Firebox Vclass appliance to a source of power that supplies the wrong voltage. Doing so will damage the appliance and void the warranty.

Power Supply Switch

Allows you to turn the appliance on or off.

UPS Port

Permits connection of the appliance to an Uninterruptable Power Supply (UPS). This type of connection enables UPS devices to notify the

Firebox V10, V60L, V60, V80, V100 Hardware Guide

7

Image 17
Contents WatchGuard V10, V60L V80 Hardware Guide FCC Certification Vcci Notice Class a ITE Declaration of Conformity Firebox Limited Hardware Warranty Copyright, Trademark, and Patent Information Firebox V10, V60L, V60, V80, V100 Hardware Guide Vii Viii Contents Vclass Descriptions WatchGuard Firebox V100 security appliance WatchGuard Firebox V60, V60L, and V80 security applianceReady PowerFirebox V10 model Admin AlarmPrivate and 1 Public ConsoleAccelerated Ethernet Interfaces Power PortFirebox V60, V60L and V80 models Console Interface High Availability Status LEDHigh Availability Interfaces Power LED Reset portAC Power Cord Power Supply SwitchGigabit interfaces Firebox V100 modelHigh Availability Status LED Power supply switch AC power cord UPS port RapidCore hardware ensemble Firebox V10, V60, V60L, V80, and V100 ComponentsHardware Descriptions Index