How to Use the CD
NOTE:
•The drivers may have been updated after this manual was published. For drivers upgrade, please contact your dealer.
•You can always find README or document files on the CD. These files contain the latest information from the software supplier. Please read the files together with this chapter.
NOTE:
•This CD supports Windows 98, Windows 2000, and Windows NT 4.0. Other systems are not supported.
•The available items may differ according to your computer model and operation system.
•If you want to play MIDI file under WinNT, please install Software Table under “d:\NT40\Audio\Cwave01_14.”
You can set up the following drivers from the CD:
Mitsumi USB Floppy driver
NOTE: If you are using Windows 2000, you will not need to install this driver. Windows NT does not support USB device.
ATI VGA driver
Crystal Audio driver
Askey MDC (modem) driver
Realtek LAN driver
Alps Touchscreen driver
FIR driver
NOTE: If you are using Windows 2000, you will not need to install this driver. Windows NT 4.0 does not support FIR.
Card Wizard driver
NOTE: If you are using Windows 98 or Windows 2000, you will not need to install this driver.
Installing Software Drivers |