List of Figures | | |
Figure 5-1SV-2000-X2 (Front View) | 18 |
Figure 5-2 SV-2000-X2 Server Components and Connectors (Front View) | 21 |
Figure 5-3 I/O Connectors | 23 |
Figure 5-4 Low Profile Internal Floppy Drive | 23 |
Figure 5-5.5 Internal Tape Drive | 24 |
Figure 5-6 Slot-loading low-profile DVD±R (DL)/-RAM/CD-RW Drive | 24 |
Figure 5-7Hot-Swap Power Supply | 26 |
Figure 5-8 Adaptec 5805 RAID Card | 27 |
Figure 5-9 Adaptec 29320 ALP-R SCSI Controller | 28 |
Figure 6-1 Control Panel | 31 |
Figure 6-2 System Properties | 31 |
Figure 6-3 Device Manger | 32 |
Figure 6-4 Device Manager | 33 |
Figure 6-5 Properties Dialog Box | 34 |
Figure 6-6 Control Panel | 36 |
Figure 6-7 Add hardware Wizard | 36 |
Figure 6-8 Control Panel | 37 |
Figure 6-9 System Properties | 38 |
Figure 6-10 Device Manger | 39 |
Figure 6-11 Quiet Boot | 44 |
Figure 6-12 Load Optimized Defaults | 45 |
Figure 6-13 Enhanced Intel | 46 |
Figure 6-14 Enhanced Intel, Disable | 47 |
Figure 6-15 Processor Confirmation Screen | 48 |
Figure 6-16 Deep C-state Support Screen | 49 |
Figure 6-17 USB Configuration | 50 |
Figure 6-18 Intel Virtualization Technology | 51 |
Figure 6-19 Save and Reset | 52 |
Figure 6-20 Grounding Wrist Strap | 53 |
Figure 6-21 Hot-Swap of 2U Server Power Supply Module | 55 |
Figure 6-22 146GB SAS HDD (Removed from HD Carrier) | 56 |
Figure 6-23 DIMM Module Bank | 58 |
Figure 7-1 Array Configuration | 64 |
Figure 7-2 Initialize Drives | 65 |
Figure 7-3 Select Drives | 66 |
Figure 7-4 Initialization Warning | 66 |
Figure 7-5 Initialized | 66 |
Figure 7-6 Create Array | 67 |
Figure 7-7 Select Drives | 68 |
Figure 7-8 RAID 5 | 69 |
Figure 7-9 Array Label | 70 |
Figure 7-10 Array Size | 71 |
SV-2000-X2 Server (CENTRIX / JHSV) | | |
Part Number: 1008080 | Page 12 of 82 | |
Version 1.4. 01/12/2010 | | |