TAG SV-2000-X2 manual

Page 32

Operations Manual

3.Click the Hardware tab, and then click the Device Manager button. (Figure 6-3).

Figure 6-3Device Manger

After opening Device Manager, you will see a list of all the devices Windows detected on your system. The Device Manager display is recreated each time the computer is started, or whenever a dynamic change to the computer configuration occurs, such as addition of a new device while the system is running.

NOTE: To include hidden devices, on the View menu, click Show hidden devices. A check mark next to Show hidden devices indicates hidden devices are showing.

Click it again to clear the check mark. Hidden devices include non-PnP devices and devices that have been physically removed from the computer but have not had their drivers uninstalled.

SV-2000-X2 Server (CENTRIX / JHSV)

 

Part Number: 1008080

Page 32 of 82

Version 1.4. 01/12/2010

 

Image 32
Contents SV-2000-X2 Server Centrix / Jhsv Operations Manual Copyright 2008 Technology Advancement Group, Inc TAG TrademarksAbout TAG Summary of QualificationsCore Competences Engineering Manufacturing and IntegrationLifecycle Management About TAG Summary of Qualifications Core CompetenciesPage Date Version Number Updated By Description Document Revision HistoryOrganization About This ManualScope and Audience Table of Contents RAID List of Figures 1SV-2000-X2 Front View11 Stripe Size Chapter Safety Instructions Types of warnings used in this manualPage SV-2000-X2 2U Server Server Overview Product InformationSpecifications Chassis & power supply Motherboard and On-board FeaturesSV-2000-X2 Server Fan Controller Processor & CacheAdditional specifications 3 SV-2000-X2 Server HighlightsMotherboard Model and Type 4 SV-2000-X2 ServerServer Components Power Management Identifying your I/O ConnectorsSystem Memory Identifying System MemoryScsi HP 920 LTO-3 Ultrium tape drive Standard Server ComponentsFloppy Drives 5Internal Tape Drive 3 D/DVD DrivePower Connector Dual-redundant, auto-sensing power supplyInput Power Line Frequency 7Hot-Swap Power Supply PCI I/O Expansion Cards Adaptec 5805 SAS/SATA RAID ControllerAdaptec 29320 ALP-R Scsi Controller 9Adaptec 29320 ALP-R Scsi ControllerProcedures Procedures Identifying Server Components Using Device ManagerServer Startup Server Shutdown1Control Panel Double-click the System icon. Figure Page Working with Device Properties 4Device ManagerPage Installing and Removing Hardware in Windows Using the Add New Hardware Wizard6Control Panel Double-click the Add Hardware icon. Figure Installing Legacy Peripherals Removing Legacy Peripherals9System Properties Click the Hardware tab 10Device Manger TAG Approved Bios Common Bios SettingsHard Drives Boot Sector Virus Boot SequencePasswords MemoryPlug and Play Bios Bios Configuration for SV-2000-X2 12Load Optimized Defaults 13Enhanced Intel 14Enhanced Intel, Disable 15Processor Confirmation Screen 16Deep C-state Support Screen 17USB Configuration 18Intel Virtualization Technology 19Save and Reset 20Grounding Wrist Strap Replacing a Hot-Swap Power Supply Module Replacing a Hot-Swap Hard Drive 11.1 146GB SAS Hard Drive Removing the Server CoverInstall system memory Unlatch both Dimm socket levers, as shown in FigureReplacing the Cmos Battery Remove Tape Drive Install Tape DriveUltrium 920 Tape Drive Page RAID RAID RAID DefinedRAID Level 1Array Configuration Create a RAID 5 Array On AdaptecPage Initialized 6Create Array 7Select Drives Page Page Page Page Page 13Cache Functionality 14Write Caching Page Operations Manual Press Enter to continue. Figure 17Cache Warning 18Hot Spare Check 19 Exit Utility About RAID Global and Hot Spares Global and Dedicated Hot SparesContact