ADTRAN 619500001-19A manual Introduction, Unpacking the Software

Page 7

1 Installing NetVanta UC Server

Introduction

This guide is written for installers who perform applicable hardware and software installations prior to configuration at the customer site. It assumes familiarity with general hardware and software installation procedures. This guide is also intended for Microsoft® Professionals and NetVanta trained professionals to install and configure the NetVanta Unified Communications Server.

Installing NetVanta Unified Communications Server on a Windows operating system allows you to manage the business communications system within a Microsoft IT environment. Integration with Active Directory allows IT administrators to manage the communications system using the same user accounts and security policies that are used in the Windows-based environment. The automatic integration requires no extra programming or special integration.

This guide covers the following topics:

Unpacking the Software on page 7

Installing Hardware and Software on page 8

Preparing to Install the NetVanta UC Server on page 9

Running the Installation Wizard on page 18

Preparing to Configure the NetVanta UC Server on page 21

Backup and Restore Procedures on page 22

We recommend that you perform the steps and procedures in the order they appear in this guide. Your requirements may vary, depending on your system configuration and needs.

If you are rerunning the UC Server Installation Wizard because you are performing an upgrade, check the release notes to determine if the Unified Communications Client software needs to be upgraded. The release notes are available online at

http://kb.adtran.com.

Unpacking the Software

The contents of the box depend on where the UC server is being configured. When you unpack the UC server, make sure that all the UC server and software components are included in the box. The box must include at least the following:

One NetVanta product CD

Product key (on a 3-inch x 5-inch card)

Once the server is unpacked, verify its physical condition by making sure that all the cards are seated firmly, and confirm that all internal component connections are tight.

619500001-19A

Copyright © 2009 ADTRAN, Inc.

7

Image 7
Contents NetVanta Unified Communications Software Licensing Agreement Service and WarrantyTrademarks To the Holder of the ManualConventions Conventions Unified Communications Server Table of Contents Unified Communications Server Unpacking the Software IntroductionInstalling the Intel Dialogic Card Installing Hardware and SoftwareTo install the Intel Dialogic card Preparing to Install the NetVanta UC Server Limitations and Restrictions Minimum System RequirementsTo start the UC server Starting the NetVanta UC ServerVerifying the Operating System Verifying the Internet ConnectionTo turn off the indexing service Configuring Antivirus SoftwareConfiguring Services Disabling the indexing serviceTo install Microsoft Outlook software Installing Microsoft Mapi ConnectorTo install the Intel Dialogic software Installing CTI Link/Tapi SoftwareTo install CTI Link hardware and software To verify the installation of the Intel Dialogic cardsTo update the driver if the cards are improperly configured To enable fax resources on the D/120JCT-LS Dialogic CardsAgent IP address IP address of the agent computer Installing the Agent for IP Office Centralized VoicemailTo install the agent Running the Installation WizardPrerequisite components Installing Prerequisite ComponentsPrerequisite components for Windows Server 2008 only Prerequisite components for Windows XP only Installing NetVanta UC Server Software Preparing to Configure the NetVanta UC ServerTo start the Server Configuration Wizard Backup and Restore ProceduresTo install remote administration tools for Windows Server Appendix A. Downloading and Installing Administration ToolsWindows Server Windows Vista Windows XP Windows XP Unified Communications Server To open the TCP ports Appendix B. Managing Windows XP Built-In Firewall