ADTRAN 619500001-19A manual Installing Hardware and Software, Installing the Intel Dialogic Card

Installing Hardware and Software Unified Communications Server

Installing Hardware and Software

To install the software, you need temporary use of the following:

•Monitor

•Keyboard

•Mouse

Connect the monitor, keyboard, and mouse to the server computer according to the manufacturer’s instructions.

The server also requires a CD-ROM drive for the product CD.

Installing the Intel Dialogic Card

Make sure that the server is unplugged before you proceed.

Remember to follow proper static grounding procedures.

You will need the following to install the Intel Dialogic card:

• One of the following Intel Dialogic cards:

DEFINITY/Communication Manager		D/82JCT-U	D/82JCT-PCIUNIV
IP Office, DEFINITY/MultiVantage, MERLIN		D/120JCT-LS	D/41JCT-LS	D/4PCIUF
MAGIX PBX or Generic Analog Integration
•	Server on which the UC server software is to be installed
•	Phillips 2 x 4 screwdriver (this may be necessary depending on the server case)

To install the Intel Dialogic card

Refer to the card's instructions and follow these steps:

1.Open the computer chassis.

2.Install each Intel Dialogic card in an available PCI slot.

8 Copyright © 2009 ADTRAN, Inc. 619500001-19A