ADTRAN 619500001-19A manual Preparing to Install the NetVanta UC Server

Page 9

Unified Communications Server	Preparing to Install the NetVanta UC Server

For information about installing the Intel Dialogic cards, please refer to the manufacturer’s instructions.

3.If you disconnected any cables to open the chassis, reconnect all cables firmly.

4.Close the computer chassis.

For multiple D/82JCT cards a jumper cable is needed (CT Bus cable).

Preparing to Install the NetVanta UC Server

The following topics are covered in this section:

•Minimum System Requirements on page 10

•Limitations and Restrictions on page 10

•Starting the NetVanta UC Server on page 11

•Verifying the Internet Connection on page 12

•Verifying the Operating System on page 12

•Configuring Antivirus Software on page 13

•Configuring Services on page 13

•Installing Microsoft MAPI Connector on page 14

•Installing CTI Link/Tapi Software on page 15

•Installing the Agent for IP Office Centralized Voicemail on page 17

To correctly install NetVanta software on the server, you need to log onto the computer as a user with local administrative rights.

We recommend that you install and configure the server at the customer site.

Additional hardware and software might be required for specific private branch exchange (PBX) integrations.

619500001-19A

Copyright © 2009 ADTRAN, Inc.

9

Image 9

Contents NetVanta Unified Communications Trademarks Service and WarrantyTo the Holder of the Manual Software Licensing AgreementConventions Conventions Unified Communications Server Table of Contents Unified Communications Server Unpacking the Software IntroductionInstalling Hardware and Software Installing the Intel Dialogic CardTo install the Intel Dialogic card Preparing to Install the NetVanta UC Server Limitations and Restrictions Minimum System RequirementsTo start the UC server Starting the NetVanta UC ServerVerifying the Operating System Verifying the Internet ConnectionConfiguring Services Configuring Antivirus SoftwareDisabling the indexing service To turn off the indexing serviceTo install Microsoft Outlook software Installing Microsoft Mapi ConnectorTo install the Intel Dialogic software Installing CTI Link/Tapi SoftwareTo update the driver if the cards are improperly configured To verify the installation of the Intel Dialogic cardsTo enable fax resources on the D/120JCT-LS Dialogic Cards To install CTI Link hardware and softwareAgent IP address IP address of the agent computer Installing the Agent for IP Office Centralized VoicemailTo install the agent Running the Installation WizardInstalling Prerequisite Components Prerequisite componentsPrerequisite components for Windows Server 2008 only Prerequisite components for Windows XP only Installing NetVanta UC Server Software Preparing to Configure the NetVanta UC ServerTo start the Server Configuration Wizard Backup and Restore ProceduresAppendix A. Downloading and Installing Administration Tools To install remote administration tools for Windows ServerWindows Server Windows Vista Windows XP Windows XP Unified Communications Server To open the TCP ports Appendix B. Managing Windows XP Built-In Firewall