2.2.2 Tools Needed
1.Phillips screw driver
2.Antistatic strap (recommended)
2.2.3Accessing the SCA Drive Tray and Installing a HDD
To install the SCA drive into the chassis, you need to first remove the SCA drive tray from the chassis.
Procedures
1.Press the release tab located on the drive tray door to release the drive tray from its locked position as shown below.
2.Pull the drive tray door upward and then pull the SCA drive tray out from the chassis.
3.Mount a hard drive in the drive tray and make sure that all the screws are securely fastened.
| 12 |