Advantech DNS-3200 user manual 2 WSS2003 Activation

Page 47

Note: The load balancing mode requires the two net- work ports to be connected to one hub for normal operation. If the user chooses not to operate under load balancing mode, or an alternative mode is required, please see “Network Configu- ration Setting”.

9.After setting load balancing mode, it is necessary to restart the sys- tem. Microsoft requires starting WSS2003 first to allow the system to become available.

3.1.2 WSS2003 Activation

Microsoft Windows Storage Server 2003 must undergo its activation pro- cedure before you start using it. The activation procedure is possible via the internet or by phone. In this chapter, the procedure for activating WSS2003 via the Internet is described. Before starting the procedure, make sure the system is available for connection to the internet.

Note: Microsoft makes the system available for use for 30 days without activating it. If the user fails to activate WSS2003 within 30 days, on the 31st day, the user will not be able to log in and then must activate to continue use.

29

Chapter3

Image 47
Contents 3U Dual Intel Xeon Storage Server with 15 Sata Channels User’s ManualCopyright Acknowledgements Product Warranty 3 years FCC Class a Declaration of ConformityTechnical Support and Assistance FCC Class BPacking List Document FeedbackUnpacking Your Advantech DNS-3200 Safety Instructions Wichtige Sicherheishinweise Page Safety Precaution Static Electricity General Electrical Safety Guidelines General Safety Guidelines ESD Safety Guidelines Removing the chassis covers Operation Safety Guidelines Before accessing the chassisProduct Compliance Information Reinstalling the chassis coversBefore installing the chassis into a rack Electromagnetic Compatibility EMC-Emissions Product SafetyContents Chapter RAID Console Operations Introduction About the Product Hardware FeaturesSystem Protection Software FeaturesDefault layouts may vary depending on the num Front panel is as shown below Product AppearanceDNS-3200 Rear panel Panel Indicators DNS-3200 User’s Manual Chassis Description and Installation Chassis Description Contents of the Accessory KitSafety Steps Before accessing the chassis Chassis InstallationImportant Safety Guidelines Tools Needed Accessing the SCA Drive Tray and Installing a HDDProcedures For Triple Redundant Power Supply- 3 x PWS-0050M Procedure Accessing the 760W Power SupplyDNS-3200 User’s Manual Procedure for Installing Chassis Rails Before installing the Chassis railsDNS-3200 User’s Manual Rack Installation DNS-3200 User’s Manual Page DNS-3200 User’s Manual Page DNS-3200 User’s Manual Configuration Turning the system on for the first time Configuration SettingsPage DNS-3200 User’s Manual Page DNS-3200 User’s Manual 2 WSS2003 Activation DNS-3200 User’s Manual 31Chapter3 DNS-3200 User’s Manual Vol/numbers.nspx Intel PROSet Network configuration settingTest Online Active Network configuration Team ModeAdapter Fault Tolerance AFT Adaptive Load Balancing ALB Swap Fault Tolerance SFTDynamic Link Aggregation Static Link AggregationManaging Arrays and Disks Array States RAID Minimum Disk RequirementsUnderstanding Array and Disk States Offline Disk States Rescanning for Changes in State Starting and Stopping Tasks Dedicated Distributed Global Working with SparesAbout Sparing Options Using Distributed Sparing To add a distributed spare while creating an array Distributed Spare field, click EnabledTo add a distributed spare while transforming an array Using Dedicated SparingDistributed Spare field, click Disabled Page Using Global Sparing Bios Configuration Utility To enter the Bios Configuration Utility Using the Bios Configuration UtilityWhen to Use the Bios Configuration Utility Initializing Disks from the Bios Color Codes for the Bios Array Config UtilityTo initialize disks from the Bios Creating Arrays from the BiosTo create an array DNS-3200 User’s Manual Create an array To Delete an Array Deleting Arrays from the BiosSwapping Arrays from the Bios Swap arrays To swap arraysTo hide or Unhide an array Hiding or Unhiding Arrays from the BiosTo view disk details Viewing Disk Details from the BiosTo view array details Viewing Array Details from the BiosRescanning All Channels from the Bios Array Number Type Size State Name Cache setting DOS sizeChanging Controller Options from the Bios Change controller options Continue Booting from the Bios DNS-3200 User’s Manual RAID Console Opera- tions RAID Console RAID Console OperationsRAID Console Management RAID list Disk State Area RAID State Area System I/O State DNS-3200 User’s Manual Page Mirror split as an advanced option Mirror split as a preset optionMirror Split Check Hide the newly Split off array Online RAID level migration Online RAID Level MigrationPage DNS-3200 User’s Manual System Maintenance System Protection & Repairs Operating System Split DNS-3200 User’s Manual Operating System Swap DNS-3200 User’s Manual Page DNS-3200 User’s Manual Operating System Repair DNS-3200 User’s Manual Page DNS-3200 User’s Manual Hardware Specifica- tions Table A.1 Hardware Specifications Appendix a Hardware SpecificationsEnvironment DNS-3200 User’s Manual