RSA Security 6.1 manual Installing the RSA Radius Server Software

Table 7. Command Options for the install_rsa.sh Command (Continued)

OptionFunction

-reppkg	Specifies the path to the replica.ccmpkg
	configuration file.
	Use only when installing a Replica RADIUS Server. Do
	not use the -reppkgoption if you are specifying the
	-primary,-primary_ips, and
	-primary_secret options.
	Default value is /opt.
-silent	Specifies that, if all required information is supplied
	through command options, the installer does not display
	user prompts.
	If you use the -silentoption and a required setting is
	missing, the installer prompts you for the missing setting.
	If you specify other command options and values and
	you do not specify the -silentoption, the installer
	uses the values you specified as defaults and prompts
	you to confirm or override them.
-start_sbr	Specifies that the installer should start the RADIUS
	daemon at the conclusion of the installation process.
-usage-help-h	Displays help for the install_rsa.sh command.

Installing the RSA RADIUS Server Software

The following procedure describes how to install the RSA RADIUS Server software on a Linux server. Some of the steps in the procedure are omitted if you specify the -silentoption for the install_rsa.sh command.

1Log into the Linux server as root.

2Copy the RSA RADIUS Server installation files

(sbr-rsa-1.0-1.i386.rpm and install_rsa.sh) to the Linux server.

The sbr-rsa-1.0-1.i386.rpm and install_rsa.sh files must reside in the same directory on the server.

3Change your current working directory to the location of the installation files you copied in Step 2.

4Execute the following command to run the installation script.

#./install_rsa.sh [options]

See Table 7 on page 29 for an explanation of the install_rsa.sh command options.

RSA RADIUS Server 6.1 Administrator’s Guide Installing the RSA RADIUS Server 31