A p p e n d i x A
Using the LDAP Configuration Interface
The LDAP Configuration Interface (LCI) is an optional
RSA RADIUS Server. You must enter a separate license number and restart RSA RADIUS Server to activate LCI functions. After the license key is registered, you can edit the settings in the configuration files. For information on adding license numbers, see “Adding a License Key” on page 43.
This appendix provides:
XThe file used to enable and configure the LDAP configuration interface (LCI)
XAn overview of the LCI and LDAP utilities
XA description of the LDAP virtual schema
XInformation about how to use LDAP utilities to configure the RSA RADIUS Server database
XSample LDIF files that control the execution of LDAP utilities
XInformation about how to view rate statistics variables with LCI utilities
LDAP Configuration Interface File
The radius.ini file specifies (among other things) the interfaces on which RSA RADIUS Server listens for LCI requests. If a specification is not present, RSA RADIUS Server listens for LCI requests on all bound IP ports.
RSA RADIUS Server 6.1 Administrator’s Guide Using the LDAP Configuration Interface | 81 |