The timeout settings for connections are:
•30 seconds for Short
•60 seconds for Medium
•300 seconds for Long.
The timeout settings for transfers are:
•150 seconds for Short
•300 seconds for Medium
•1500 seconds for Long.
5Enter Max Clients. This is the maximum number of concurrent FTP client connections.
6Enter Max Clients per IP. This is the maximum number of concurrent FTP client connections per IP address.
7Enter the Max Transfer Rate. This is the maximum rate, in Bytes, of FTP data transfer.
8Click on the Security tab. This allows you to enter IP addresses and/or hostnames which you wish to explicitly Allow or Deny FTP access to the SNAZ.
Note: When hosts are added to either the Allow or Deny lists, all other hosts automatically become marked as the opposite, unless they are specified otherwise.
9Click 
to save the changes and, as appropriate, click 
to start or click 
to stop the service.
97707987 Rev A | 19 |