Promise Technology VTM310i, VTM610i, VTM210 quick start Selecting a Language, Creating a Disk Array

Page 26

VTrak M610i, M310i, M210i Quick Start Guide

Selecting a Language

WebPAM PROe displays in English, German, French, Italian, Japanese, Chinese Traditional, Chinese Simple, and Korean.

1.Click Language on the WebPAM PROe Header. The language list appears in the Header.

2.Click on the language you prefer.

The WebPAM PROe user interface displays in the selected language.

Figure 21.Clicking “Language” on the WebPAM PROe Header

Creating a Disk Array

On a newly activated VTrak subsystem, there are no disk arrays or logical drives. To create a disk array:

1.Click on the Disk Arrays icon, then click on the Create tab. The Array Configuration menu appears. See Figure 22.

2.Choose one of the options:

Automatic – Creates a new disk array based on a default set of parameters, including one logical drive. The number of unconfigured physical drives available determines the RAID level of the disk array and whether a spare drive is created. See page 27.

Express – Creates a new disk array based on the characteristics you specify. You can create multiple logical drives. However, all of the logical drives will be the same size and RAID level. See page 28.

Advanced – Enables you to directly specify all parameters for a new disk array and its logical drives. See page 29.

3.Click the Next button.

Figure 22.The Array Configuration menu

26

Image 26
Contents Vtrak VTrak Installation Task List Unpacking the VTrakVTrak M610i front view VTrak M610i rear view Mounting VTrak in a Rack Mounting the VTrak M610i in a RackRack mount assembly diagram Mounting VTrak M310i or M210i in a Rack Rackmounted VTrak M310i M210i is similarSliding flange installation Mounting rail installation Level Number of Drives Installing Disk DrivesDrive Slot Numbering Installing Disk Drives VTrak drive carrier mounting holes Data Path Configuring an IP Storage Area NetworkMaking Management and Data Connections Management PathConfiguring Direct Attached Storage VTrak DAS connectionsMaking Serial Cable Connections Connecting the Power VTrak front panel LED display. The M610i is shownConnecting the Power Setting the IP Address Viewing MAC and IP Addresses in the CLU Choosing Dhcp or a Static IP AddressViewing MAC and IP Addresses in the CLI Administrator@cli net -a mod -t iSCSI -p 1 -s dhcp=enable Setting up VTrak with the CLIAdministrator@cli net -a mod -t mgmt -s dhcp=enable 192.168.10.1 ISCSI Making Management Port settings Setting up VTrak with the CLUSetting system date and time Manual IP settingsExiting the CLU Viewing IP address and settingsAutomatic IP settings Regular Connection Creating Disk Arrays with WebPAM PROeLogging into WebPAM PROe Secure ConnectionWebPAM PROe log-in screen Selecting a Language Creating a Disk ArrayAutomatic Express Logical Drive Creation AdvancedDisk Array Creation Summary Using WebPAM PROe over the InternetLogging out of WebPAM PROe United States Technical Support ServicesContacting Technical Support NetherlandsTaiwan GermanyItaly China Obtaining a Security CertificateVTrak M610i, M310i, M210i Quick Start Guide