VTrak M610i, M310i, M210i Quick Start Guide
3.Attach the mounting rail assemblies to the outside of the rack posts, using the attaching screws from your rack system.
Be sure the support is on the bottom facing inward.
4.Square the rail assemblies in the rack.
5.Tighten the adjustment screws and the attaching screws.
6.Place the VTrak subsystem onto the rails.
7.Secure the VTrak subsystem to the rack through each handle, using the attaching screws from your rack system.
Figure 6. Rack mount assembly diagram
Rack front post | Rack back post |
Rail attaching screw | Rail attaching screw |
(not included) | (not included) |
Front rail | Rear rail |
Flange | |
Support | |
Rail adjustment screw | Rail adjustment screw |
Inside of post | Inside of post |
|
6