
VTrak M610i, M310i, M210i Quick Start Guide
Step 7: Setting the IP Address
VTrak has a Command Line Interface (CLI) to manage all of its functions, including customization. A subset of the CLI is the Command Line Utility (CLU), a
To set up the serial connection:
1.Change your terminal emulation program settings to match the following specifications:
•Bits per second: 115200
•Data bits: 8
•Parity: None
•Stop bits: 1
•Flow control: none
2.Start your PC’s terminal VT100 or ANSI emulation program.
3.Press Enter once to launch the CLI.
4.At the Login prompt, type administrator and press Enter.
5.At the Password prompt, type password and press Enter.
At this point, you are in the CLI. You can continue using the CLI to make network settings or you can switch to the CLU. Go to:
•Setting up VTrak with the CLI (page 20)
•Setting up VTrak with the CLU (page 22)
18