Packard Bell E680 manual Removing the CPU, Removing the screws retaining CPU cover

Page 10

Removing the CPU

To remove the CPU, first remove the battery (see Removing the Battery), then perform the following steps:

3. Remove the screw retaining the CPU cover as shown in Fig. 10

Fig. 10 Removing the screws retaining CPU cover

4. Remove heat sink screws, disconnect fan connector and lift up the heat sink.

M3.5x2 Black

M10.5x2 Sliver

Fig. 11 Removing the screws retaining the heat plate

NEC Versa E680/PB EasyNote E5 Disassembly Manual

Page 10

Image 10

Contents Versa E680 Disassembly Manual Table of contents Overview Disassembly InstructionsReassembly Instructions Technician NotesHazardous Voltage Power Supply UnitAvoid Electrostatic Discharge Removing the Battery Removing the batteryRemoving the Hard Disk Drive Removing the Hard disk drive coverDisconnect and lift up the hard disk module as shown in Fig Removing the Memory Module Removing the screw retaining the memory module slot coverRemoving the Wireless LAN Removing the screws screw retaining the mini PCI slot coverRemoving the CPU Removing the screws retaining CPU coverUnlock CPU from CPU socket and lift up the CPU carefully Removing the optical disk drive Releasing the optical driveRemoving the Keyboard Releasing the keyboard coverRemoving the Main Board Disconnect keyboard flat cableDisconnect Touch Pad Connection as shown in Fig Flip over unit and release all screws as shown in Fig Lift up Main Board as shown in Fig NEC Versa E680/PB EasyNote E5 Disassembly Manual Removing the LCD Module Removing screws retaining LCD ModuleRemoving the LCD Panel Removing the rubber covers & screws on the LCD ModuleRemoving the LCD panel screws LCD Hock Removing the Touch Pad Top coverRemoving the Speaker Assembly DIP Switch SettingScrews Versa E680 Disassembly Manual