Packard Bell E680 manual Removing the Speaker Assembly, DIP Switch Setting

Page 24

Removing the Speaker Assembly

To remove the Speaker assembly, first open up the Keyboard cover (See Removing Keyboard), Remove Bottom Cover (See Removing Main Board) the perform the following steps:

1. Remove the screws holding Speaker Assembly as shown in Fig. 33

Fig. 33 Speaker Assembly

2. Carefully remove the Speaker assembly from Top Cover and place it aside.

DIP Switch Setting

No DIP Switch Setting Required on NEC Versa E680 / Packard Bell Easynote E5.

M4.5x2 Black

NEC Versa E680/PB EasyNote E5 Disassembly Manual

Page 24

Image 24

Contents Versa E680 Disassembly Manual Table of contents Disassembly Instructions Reassembly InstructionsOverview Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Removing the Battery Removing the batteryRemoving the Hard Disk Drive Removing the Hard disk drive coverDisconnect and lift up the hard disk module as shown in Fig Removing the Memory Module Removing the screw retaining the memory module slot coverRemoving the Wireless LAN Removing the screws screw retaining the mini PCI slot coverRemoving the CPU Removing the screws retaining CPU coverUnlock CPU from CPU socket and lift up the CPU carefully Removing the optical disk drive Releasing the optical driveRemoving the Keyboard Releasing the keyboard coverRemoving the Main Board Disconnect keyboard flat cableDisconnect Touch Pad Connection as shown in Fig Flip over unit and release all screws as shown in Fig Lift up Main Board as shown in Fig NEC Versa E680/PB EasyNote E5 Disassembly Manual Removing the LCD Module Removing screws retaining LCD ModuleRemoving the LCD Panel Removing the rubber covers & screws on the LCD ModuleRemoving the LCD panel screws LCD Hock Removing the Touch Pad Top coverRemoving the Speaker Assembly DIP Switch SettingScrews Versa E680 Disassembly Manual