Packard Bell E680 manual Removing the Main Board, Disconnect keyboard flat cable

Page 14

3. Lift up the keyboard and disconnect it from the system as shown in Fig. 16

Fig. 16 Disconnect keyboard flat cable

Removing the Main Board

To remove the Main Board , first remove the battery (see Removing the Battery), remove Keyboard (see Removing Keyboard) then perform the following steps:

1.Use small flat screwdriver to remove hinge cover and release screws near to battery compartment at both side.

Fig. 17 Removing the top cover screws

M4.5x3.5 Black

NEC Versa E680/PB EasyNote E5 Disassembly Manual

Page 14

Image 14

Contents Versa E680 Disassembly Manual Table of contents Overview Disassembly InstructionsReassembly Instructions Technician NotesAvoid Electrostatic Discharge Power Supply UnitHazardous Voltage Removing the Battery Removing the batteryRemoving the Hard Disk Drive Removing the Hard disk drive coverDisconnect and lift up the hard disk module as shown in Fig Removing the Memory Module Removing the screw retaining the memory module slot coverRemoving the Wireless LAN Removing the screws screw retaining the mini PCI slot coverRemoving the CPU Removing the screws retaining CPU coverUnlock CPU from CPU socket and lift up the CPU carefully Removing the optical disk drive Releasing the optical driveRemoving the Keyboard Releasing the keyboard coverRemoving the Main Board Disconnect keyboard flat cableDisconnect Touch Pad Connection as shown in Fig Flip over unit and release all screws as shown in Fig Lift up Main Board as shown in Fig NEC Versa E680/PB EasyNote E5 Disassembly Manual Removing the LCD Module Removing screws retaining LCD ModuleRemoving the LCD Panel Removing the rubber covers & screws on the LCD ModuleRemoving the LCD panel screws LCD Hock Removing the Touch Pad Top coverRemoving the Speaker Assembly DIP Switch SettingScrews Versa E680 Disassembly Manual