Packard Bell E680 manual Removing the LCD panel screws

Page 21

3.Unscrew all screws circled in Fig. 27 and disconnect LCD back light cable from inverter board before lift up LCD penal.

Fig. 27 Removing the LCD panel screws

4.Remove the screws at both sides of the LCD panel in order to release the LCD hinges as shown in Fig. 28

Fig. 28 Removing the LCD Panel hinges

A = M6x2.5 Black

B = M3.5x2 Black

C = M4.5x2.5

Sliver

M3.5x2 Black

NEC Versa E680/PB EasyNote E5 Disassembly Manual

Page 21

Image 21

Contents Versa E680 Disassembly Manual Table of contents Reassembly Instructions Disassembly InstructionsOverview Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Removing the battery Removing the BatteryRemoving the Hard disk drive cover Removing the Hard Disk DriveDisconnect and lift up the hard disk module as shown in Fig Removing the screw retaining the memory module slot cover Removing the Memory ModuleRemoving the screws screw retaining the mini PCI slot cover Removing the Wireless LANRemoving the screws retaining CPU cover Removing the CPUUnlock CPU from CPU socket and lift up the CPU carefully Releasing the optical drive Removing the optical disk driveReleasing the keyboard cover Removing the KeyboardDisconnect keyboard flat cable Removing the Main BoardDisconnect Touch Pad Connection as shown in Fig Flip over unit and release all screws as shown in Fig Lift up Main Board as shown in Fig NEC Versa E680/PB EasyNote E5 Disassembly Manual Removing screws retaining LCD Module Removing the LCD ModuleRemoving the rubber covers & screws on the LCD Module Removing the LCD PanelRemoving the LCD panel screws LCD Hock Top cover Removing the Touch PadDIP Switch Setting Removing the Speaker AssemblyScrews Versa E680 Disassembly Manual