SuperSwap Manual
Key Features
The following are key features of the Promise SuperSwap:
Drive Types
∙Supports standard IDE drives (Ultra ATA, DMA, and EIDE)
∙Supports Ultra ATA/100 and Ultra ATA/66.
ATA RAID “Hot Swap” Support
∙Supports Promise ATA RAID products allowing “hot swap” under RAID 1, 3, or 5
∙Hot swap allows for easy repair/replacement of drives while PC remains active
Status Indicators2
∙Power/Drive Status LED shows power on/off when not used with Promise SuperTrak100 or SuperTrak66 products
∙Power/Drive Status LED displays status of drive in array (online, offline, critical (rebuilding/synchronizing) if used with Promise SuperTrak100 or SuperTrak66 products
∙Disk Activity LED displays normal drive operation
Ultra ATA/100 Support
∙Passes all Ultra ATA/100 information to controller card
∙Allows
2Note: Users must obtain and install Promise FastTrak Driver v.1.30 or later in order to implement LED display functions for SuperSwap enclosure. Go to www.promise.com to find these drivers.
Note: For proper monitoring functionality of Fan RPM, Voltage, & Temperature users must install FastCheck for FastTrak Product Family or SuperCheck for SuperTrak, please visit www.promise.com for the latest software revisions.
3