FieldServer FS-8700-124 instruction manual Table of Contents

Page 2

ProtoNode Driver Manual (FS-8700-124) rev 6.doc Manual

Table of Contents

TABLE OF CONTENTS

1.

TIC UPS DESCRIPTION

3

2.

DRIVER SCOPE OF SUPPLY

4

 

2.1. Supplied by FieldServer Technologies for this driver

4

 

2.2. Provided by the Supplier of 3rd Party Equipment

4

 

2.2.1. Required 3rd Party Hardware

4

 

2.2.2. Required 3rd Party Software

4

 

2.2.3. Required 3rd Party Configuration

4

3.

HARDWARE CONNECTIONS

5

3.1. Hardware Connection Tips / Hints

5

4.

CONFIGURING THE FIELDSERVER AS A TIC UPS CLIENT

6

4.1.

 

Data Arrays/Descriptors

6

4.2. Client Side Connection Descriptions

7

4.3. Client Side Node Descriptors

7

4.4. Client Side Map Descriptors

8

4.4.1. FieldServer Related Map Descriptor Parameters

8

4.4.2. Driver Related Map Descriptor Parameters

8

4.5.

 

Map Descriptor Example

9

4.5.1.

Example 1

9

4.5.2.

Example 2

9

APPENDIX A. COMMANDS SPECIFIC TO DEVICES

10

Appendix A.1. Client Read commands

10

Appendix A.1.1.

FAULT command:

12

Appendix A.1.2.

ALARM command:

13

Appendix A.1.3.

STATUS command:

13

Appendix A.1.4. Commands supported by Different Models

14

Appendix A.2. Client Write Commands

14

Appendix A.2.1. Commands supported by different models

15

APPENDIX B. TROUBLESHOOTING TIPS

16

Appendix B.1. Connection Tips & Hints

16

ProtoCessor 1991 Tarob Court Milpitas, California 95035 USA Web:www.protocessor.com

Tel: 408.964.4433 Fax: 408.964.4425 Toll_Free: 800.317.8319 email: sales@protocessor.com

Image 2
Contents Effective for all systems manufactured after May 1 Driver Version Document RevisionTable of Contents Max Nodes Supported ProtoNode Mode Comments Required 3rd Party Configuration Required 3rd Party SoftwareHardware Connection Tips / Hints Toshiba UPSColumn Title Function Legal Values Data Arrays/DescriptorsSection Title ExampleClient Side Node Descriptors Section Title EvenNone ProtoNode Driver Manual FS-8700-124 rev 6.doc Manual Example Alarm Following commands are supported with the Rdbc function Command Description ProtoNode Driver Manual FS-8700-124 rev 6.doc ManualAppendix A.1.1. Fault command Bit # FunctionBit # Description Appendix A.1.2. Alarm commandAppendix A.1.3. Status command Appendix A.2. Client Write Commands 1600 1800 4200 G8000 & G8000MM G9000Appendix A.2.1. Commands supported by different models 1600 1800 4200 G8000 & G8000MM, G9000Page ProtoNode Driver Manual FS-8700-124 rev 6.doc Manual Page 17