ProtoNode Driver Manual
Page 3 of 17
1.TIC UPS Description
The serial TIC UPS driver allows the ProtoNode to transfer data to and from devices over RS- 232 using TIC UPS protocol. The ProtoNode can emulate a Client.
This driver is intended for use with Toshiba models UPS. It is intended to do the following:
Read information from the UPS such as battery life, voltages etc. This will be done in user mode on the UPS.
Write information and commands such as shutdown commands to the UPS.
Advanced options such as reading/writing EEPROM is not supported. No date/time reads or writes will be supported. No string type commands will be supported.
Max Nodes Supported
ProtoNode Mode |
| Nodes |
|
| Comments |
|
Client |
| 1 |
|
| As the Toshiba protocol only allows for 1:1 communication |
|
|
|
| at this stage, only 1 client is allowed per |
| ||
|
|
|
|
|
| |
Server |
| 1 |
|
| The server only serves for emulation purposes. It will have |
|
|
|
| a static address as per Toshiba spec. |
| ||
|
|
|
|
|
|
ProtoCessor 1991 Tarob Court Milpitas, California 95035 USA Web:www.protocessor.com
Tel: 408.964.4433 Fax: 408.964.4425 Toll_Free: 800.317.8319 email: sales@protocessor.com