FieldServer FS-8700-124 Required 3rd Party Software, Required 3rd Party Configuration

Page 4

ProtoNode Driver Manual (FS-8700-124) rev 6.doc Manual

Page 4 of 17

2.Driver Scope of Supply

2.1.Supplied by FieldServer Technologies for this driver

	FieldServer Technologies			Description
	PART #			Description
	PART #
FS-8917-02				RJ45 to DB9F connector adapter.
FS-8917-03				RJ45 to DB9M connector adapter.
FS-8700-124				Driver Manual.

2.2.Provided by the Supplier of 3rd Party Equipment

2.2.1.Required 3rd Party Hardware

Part #

-

Description

TIC UPS model 1600/1800/4200/G8000/G8000MM/G9000

2.2.2.Required 3rd Party Software

None

2.2.3.Required 3rd Party Configuration

The baud rate of the UPS must match the configuration file of the ProtoNode.

ProtoCessor 1991 Tarob Court Milpitas, California 95035 USA Web:www.protocessor.com

Tel: 408.964.4433 Fax: 408.964.4425 Toll_Free: 800.317.8319 email: sales@protocessor.com

Image 4

Contents Effective for all systems manufactured after May 1 Driver Version Document RevisionTable of Contents Max Nodes Supported ProtoNode Mode Comments Required 3rd Party Configuration Required 3rd Party SoftwareHardware Connection Tips / Hints Toshiba UPSData Arrays/Descriptors Section TitleColumn Title Function Legal Values ExampleNone EvenClient Side Node Descriptors Section Title ProtoNode Driver Manual FS-8700-124 rev 6.doc Manual Example Alarm Following commands are supported with the Rdbc function Command Description ProtoNode Driver Manual FS-8700-124 rev 6.doc ManualAppendix A.1.1. Fault command Bit # FunctionAppendix A.1.3. Status command Appendix A.1.2. Alarm commandBit # Description Appendix A.2. Client Write Commands 1600 1800 4200 G8000 & G8000MM G9000Appendix A.2.1. Commands supported by different models 1600 1800 4200 G8000 & G8000MM, G9000Page ProtoNode Driver Manual FS-8700-124 rev 6.doc Manual Page 17