FieldServer FS-8700-60 instruction manual Table of Contents

FS-8700-60 Gardner Denver Manual Table of Contents

TABLE OF CONTENTS

1.	Gardner Denver Auto Sentry ES/RS2000 Description		1
2.	Driver Scope of Supply		2
	1.01	Supplied by FieldServer Technologies for this driver	2
	1.02	Provided by the Supplier of 3rd Party Equipment	2
	2.1.1. Required 3rd Party Hardware		2
	2.1.2. Required 3rd Party Software		2
	2.1.3. Required 3rd Party Configuration		2
	2.1.4. Optional Items		2
3.	Hardware Connections		3
	1.03	Hardware Connection Tips / Hints	3

4.Configuring the FieldServer as a Gardner Denver Auto Sentry ES/RS2000

Client		4
1.04	Data Arrays/Descriptors	4
1.05	Client Side Connection Descriptions	5
1.06	Client Side Node Descriptors	6
1.07	Client Side Map Descriptors	6
4.1.1. FieldServer Related Map Descriptor Parameters		6
4.1.2. Driver Related Map Descriptor Parameters		7
4.1.3.	Timing Parameters	7
4.1.4. Map Descriptor Example 1 – Polling all available Controller Data		8
4.1.5.	Map Descriptor Example 2 - Polling only specific data items	9

4.1.6.Map Descriptor Example 3 - Polling all data and isolating specific data items 9

Appendix 1.	Advanced Topics		10
Appendix 1.1.		Can I use only Passive Client mapdescs ?	10
Appendix 1.2.		Data length of specific polls versus “All” data polls	10
Appendix 2.	Revision History		11

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com