| Page 5 of 11 |
1.05Client Side Connection Descriptions
| Section Title |
|
|
|
| Connections |
|
|
|
| Column Title | Function |
| Legal Values |
|
| Specify which port the device |
| |
| Port | is connected to the |
| |
|
| FieldServer |
|
|
| Protocol | Specify protocol used |
| Gardner_Denver |
| Baud* | Specify baud rate | 1200, 9600 (match to Controller) | |
| Parity* | Specify parity |
| None |
| Data_Bits* | Specify data bits | 7 | |
| Stop_Bits* | Specify stop bits | 1 | |
| Handshaking* | Specify hardware |
| None |
| handshaking |
| ||
| Poll_Delay* | Time between internal polls |
| > = 0.2s |
| Timeout* | Time to wait for response |
| > = 0.6s |
Example
//Client Side Connections
Connections
| Port, | Protocol |
| |
| P1, |
| Gardner_Denv |
|
|
| er |
| |
|
|
|
| |
1Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)