Page 1 of 11 |
1.Gardner Denver Auto Sentry ES/RS2000 Description
The Gardner Denver Auto Sentry ES/RS2000 driver allows the FieldServer to transfer data from devices over either
The client driver implements the following functionality:
•Polls controllers for service and maintenance data.
•Polls controllers for operating mode data.
•Polls controllers for operating data.
The driver can poll up to 8 units connected to one ES/RS2000 Controller. It always sets the active unit on the ES/RS2000 Controller before polling for data even if consecutive polls are for the same unit. This is done to prevent synchronization problems.
Gardner Denver ES/RS2000 Controllers implements three message types for which the driver can poll. The driver does not validate the message data fields for correct values although it does validate data field lengths For example, shutdown codes reported by V2.1 ES Controllers range from 0 to 27. If a code of 28 is reported, the driver will not flag it as an error since codes have to be interpreted by the operator. However, a message length longer than 2 digits will be reported as an error.
Max Nodes Supported
FieldServer Mode | Nodes | Comments | |
Client | 1 | A client node can communicate with up to 8 units | |
connected to a ES/RS2000 Controller | |||
|
|
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)