FieldServer FS-8700-47 instruction manual Configuring the FieldServer as a DNP 3.0 Driver Server

Page 16

FS-8700-47 DNP 3.0 Driver Manual

Page 16 of 51

 

 

5.Configuring the FieldServer as a DNP 3.0 Driver Server

For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (See “.csv” files provided with the FieldServer.)

This section documents and describes the parameters necessary for configuring the FieldServer to communicate with a DNP 3.0 Driver Client.

The configuration file tells the FieldServer about its interfaces, and the routing of data required. In order to enable the FieldServer for DNP 3.0 Driver communications, the driver independent FieldServer buffers need to be declared in the “Data Arrays” section, the FieldServer virtual node(s) needs to be declared in the “Server Side Nodes” section, and the data to be provided to the Clients needs to be mapped in the “Server Side Map Descriptors” section. Details on how to do this can be found below.

Note that in the tables, * indicates an optional parameter, with the bold legal value being the default.

5.1.Server Side Connection Descriptors

 

Section Title

 

 

 

 

 

 

 

 

Connections

 

 

 

 

 

 

 

 

Column Title

 

 

 

Function

Legal Values

 

Port

 

Specify which port the device is connected to the

P1-P8, R1-R22

 

 

 

FieldServer

 

 

 

 

 

Baud*

 

Specify baud rate

 

 

110 – 115200, standard baud

 

 

 

 

rates only

 

 

 

 

 

 

 

 

 

Parity*

 

Specify parity

 

 

 

Even, Odd, None, Mark, Space

 

Data_Bits*

 

Specify data bits

 

 

7, 8

 

 

 

 

 

 

 

 

 

 

Stop_Bits*

 

Specify stop bits

 

 

1

 

 

 

 

 

 

 

 

 

 

Protocol

 

Specify protocol used

 

 

DNP

 

 

 

 

 

 

 

 

 

 

Handshaking*

 

Specify hardware handshaking

None

 

Example

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

// Server Side Connections

 

 

 

 

 

Connections

 

 

 

 

 

 

 

 

Port

,Baud

,Parity

,Protocol

,Handshaking

 

 

 

P8

,9600

,None

,DNP

,None

 

 

2Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Driver Manual FS-8700-47 DNP Table of Contents FS-8700-47 DNP 3.0 Driver Manual Table of Contents DNP 3.0 Driver Description Page FS-8700-47 DNP 3.0 Driver Manual Hardware Connections Connection NotesConfiguring the FieldServer as a DNP 3.0 Driver Client Data ArraysClient Side Connection Descriptors Client Side Node DescriptorsDriver Specific Map Descriptor Parameters Timing Parameters Map Descriptor Example 1 Simple Read Map Descriptor Example 3 Simple Read Extract Value & Status Map Descriptor Example 4 Reading Class Data Map Descriptor Example 6 Read an unknown variation Configuring the FieldServer as a DNP 3.0 Driver Server Server Side Connection DescriptorsServer Side Node Descriptors Driver Specific Map Descriptor Parameters Map Descriptor Example 1 Discrete Data Map Descriptor Example 2 Class DataMap Descriptor Example 3 Class Data another example RTUMap Descriptor Example 4 Default Variation Variation zero Map Descriptor Example 5 ClassDataServingCtrl AnaInputs Map Descriptor Example 6 Unsolicited Messages Server Side Limitations Appendix A. Advanced Topics Appendix A.1. DNP 3.0 Protocol Appendix A.2. DNP Driver FunctionalityAppendix A.3. DNP Objects mapped to FieldServer Data Arrays Appendix A.4. Channel Idle, Master & Slave IdleAppendix A.5. DLL Layer Functionality in the Master Appendix A.6. App Layer Functionality in the MasterAppendix A.7. Internal Indications, Object 80 and Dnpii Incoming Internal Indications BytesPage Internal Indications reported in Responses ServerIIArrayResponses to Polls for Object 80 Internal Indications Appendix A.8. DNPStats DnpstatsAppendix A.9. DNP 3.0 Data Objects Counter Change Event All Variations See notes in Appendix A.10 for function code FS-8700-47 DNP 3.0 Driver Manual Appendix A.11. Controlling the DNP 3.0 Driver’s Qualifier Appendix A.12. FieldServer DNP Node NumberAppendix A.13. DnpSubType Appendix A.15. Link ResetAppendix A.14. Communication Stats Appendix A.16. Controlling DA Offsets Appendix A.17. dnpIndexStyleAppendix A.18. Real Time Clock Synchronization DatimePage Appendix A.19. Select and Operate Page Page Appendix A.20. Multiple requests in a single poll Appendix B. Driver Error Messages Page Page Page FYI
Top Page Image Contents