| Page 17 of 51 |
|
|
5.2.Server Side Node Descriptors
|
| Section Title |
|
|
|
|
|
|
|
|
| Nodes |
|
|
|
|
|
|
|
|
| Column Title |
| Function |
|
| Legal Values | ||
|
|
|
|
|
|
| Up | to | 32 |
|
| Node_Name | Provide name for node |
|
| alphanumeric | |||
|
|
|
|
|
|
| characters |
| |
|
| Node_ID | DNP 3.0 station address of physical Server node |
|
| ||||
|
| Protocol | Specify protocol used |
| DNP |
|
| ||
|
|
| This parameter can be specified to configure the |
| Class0; |
| Class1; | ||
|
| Class_Data_Serving_Ctr*l | Server to serve changed data only. | Refer to |
| Class2; |
| Class3; | |
|
|
| Example 5.3.8 for more information. |
|
| Static |
|
| |
|
|
| The name of a Data Array that has previously |
|
|
|
| ||
|
| Server_II_Array | been defined in the configuration in the Data |
| Max 15 characters | ||||
|
| Arrays section. Refer to Error! | Reference |
| |||||
|
|
| source not found.. |
|
|
|
|
| |
|
| Example |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| // Server Side Nodes |
|
|
|
|
|
|
|
Nodes |
|
|
Node_Name | ,Node_ID | ,Protocol |
FieldServer | ,11 | ,DNP |
5.3.Server Side Map Descriptors
5.3.1.FieldServer Specific Map Descriptor Parameters
Column Title | Function | Legal Values | |
Map_Descriptor_Name | Name of this Map | Up to 32 alphanumeric characters | |
Descriptor | |||
| Name of Data Array |
| |
Data_Array_Name | where data is to be | One of the Data Array names from “Data | |
stored in the | Array” section above | ||
| |||
| FieldServer |
| |
Data_Array_Offset | Starting location in Data | 0 to maximum specified in “Data Array” | |
Array | section above | ||
| |||
|
| Generally for Server side nodes you will | |
Function | Function of Client Map | use the PASSIVE function. The WRBX | |
Descriptor | function may be used to generate | ||
| |||
|
| unsolicited messages. |
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com