FieldServer HCS-R Client Side Connection Descriptions, Client Side Node Descriptors, Hcs-R

FS-8700-127 Hanning & Kahl HCS-R Manual Page 7 of 17

4.2.Client Side Connection Descriptions

Section Title
Connections
Column Title			Function				Legal Values
Port		Specify which port the device			is	P1-P81
		connected to the FieldServer
						HCS-R
Protocol		Specify protocol used				HCSR
						H&K HCS-R
Baud*		Specify baud rate				9600 (Vendor limitation)
Parity*		Specify parity				None (Vendor limitation)
Data_Bits*		Specify data bits				8 (Vendor limitation)
Stop_Bits*		Specify stop bits				1 (Vendor limitation)
Handshaking*		Specify hardware handshaking				None (Vendor limitation)
Poll_Delay*		Time between internal polls				0-32000 seconds, 0.05 seconds
Example
// Client Side Connections
Connections
Port,	Protocol,		Baud,	Parity,	Handshaking,		Poll_Delay
P8,	HCS-R,		9600,	None,	None,		0.100s

4.3.Client Side Node Descriptors

Section Title
Nodes
Column Title	Function			Legal Values
Node_Name	Provide name for Node		Up to 32 alphanumeric characters
Node_ID	HCS-R station address	of physical	240 (Protocol limit)
	server Node
			HCS-R
Protocol	Specify protocol used		HCSR
			H&K HCS-R
Connection	Specify which port the	device is	P1-P81
	connected to the FieldServer
Example
// Client Side Nodes
Nodes
Node_Name,	Node_ID,	Protocol,		Connection
PLC 1,	240,	HCS-R,		P8

1Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com