| Page 8 of 17 |
4.4.Client Side Map Descriptors
4.4.1.FieldServer Related Map Descriptor Parameters
Column Title | Function |
| Legal Values | ||
Map_Descriptor_Name | Name of this Map Descriptor | Up | to 32 | alphanumeric | |
characters |
| ||||
|
|
| |||
| Name of Data Array where data | One of the Data Array names | |||
Data_Array_Name | is to be stored in the | from “Data Array” section above | |||
| FieldServer |
|
|
| |
Data_Array_Offset | Starting location in Data Array | 0 to | maximum | specified in | |
“Data Array” section above | |||||
|
| ||||
Function | Function of Client Map | RDBC, Passive_Client | |||
| Descriptor |
|
|
| |
4.4.2.Driver Related Map Descriptor Parameters
| Column Title |
|
| Function |
| Legal Values |
|
|
|
|
|
| One of the Node Names |
| Node_Name | Name of Node to fetch data from | specified in “Client Node | |||
|
|
|
|
|
| Descriptor” above |
|
| For Passive_Client Map Descriptor |
| |||
| HCSR_OnFrom | specify whether data From Loop or | On, From, OnFrom | |||
|
| On Loop should be stored. |
|
| ||
|
| For Passive_Client Map Descriptor |
| |||
| HCSR_Loop | specify loop number for which data | 1,2,3,4 | |||
|
| should be stored. |
|
| ||
|
| Length of Map Descriptor |
|
| ||
|
| 22 (min) for RDBC Map Descriptor: |
| |||
|
| 24 if data_type is Dig_Input |
|
| ||
| Length | 21 for Passive_Client Map | 22 or 24, 21 | |||
|
| Descriptor. |
|
|
| |
|
| It | also | depends | upon |
|
|
| HCSR_Data_Stages parameter |
|
| ||
|
| Refer to Appendix A |
|
| ||
| Data_Type* | Specify how data will be stored. | Ana_Input | |||
| Refer to Appendix A |
| Digi_Input2 | |||
|
| Specify the number of stages to |
| |||
| HCSR_Data_Stages* | keep history of data changes. |
| 0,1,2,3 | ||
|
| 0 and 1 means no history |
|
| ||
4.4.3.Timing Parameters
Column Title | Function | Legal Values |
Scan_Interval | Rate at which data is polled | ≥0.001s |
2Default for Digi_Input
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com Tel: 408