| Page 8 of 15 |
4.3.Client Side Node Descriptors
| Section Title |
|
|
|
|
|
| Nodes |
|
|
|
|
|
| Column Title |
| Function |
| Legal Values | |
| Node_Name | Provide name for node |
| Up to 32 alphanumeric characters | ||
|
| This commonly | used | node |
| |
|
| descriptor | parameter has | no |
| |
|
| special meaning for this driver. |
| |||
| Node_ID | Incoming | messages | could come |
| |
| from any node. |
|
|
| ||
|
|
|
|
| ||
|
| A Node_ID may be allocated and |
| |||
|
| any value may be used |
|
| ||
| Protocol | Specify protocol used |
| ASCII. | ||
| Connection | Specify which port the device is | ||||
|
| connected to the FieldServer |
|
| ||
| Example |
|
|
|
|
|
//Client Side Nodes
Nodes |
|
|
|
Node_Name, | Node_ID, | Protocol, | Connection |
PLC 1, | 1, | ASCII, | P8 |
2Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)