FieldServer FS-8700-115 instruction manual Hardware Connections

Page 5

FS-8705-06 GPA (General Purpose ASCII) Manual

Page 5 of 15

3.Hardware Connections

The FieldServer is connected to the vendor device as shown in connection drawing. Configure the ASCII Passive Client according to manufacturer’s instructions

Ethernet Network

Connection via std networking interfaces such as hubs, switches,

routers.

ASCII Data

Source

Eg. Scale

Use 8917-02 or a 3 wire cable where you connect the remote device Xmit to RJ45-01, the remote Receive to RJ45-08 and, the gound wire to RJ45-04.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

Image 5

Contents FS-8700-115 General Purpose Ascii Table of Contents FS-8705-06 GPA General Purpose Ascii Manual Max Nodes Supported FieldServer Mode CommentsGPA General Purpose Ascii Driver Description FieldServer Technologies Description Required 3rd Party ConfigurationHardware Connections Data Arrays/Descriptors Configuring the FieldServer as an GPA Driver ClientSection Title Column Title Function Legal ValuesAscii Client Side Connection DescriptionsClient Side Node Descriptors Column Function Legal Values Title Driver Related Map Descriptor ParametersMap Descriptor Example Configuring the FieldServer as a GPA Driver Server Appendix A.2. Interaction with the WebServer Driver Appendix B. Troubleshooting tips Appendix B.1. Timeouts FS-8705-06 GPA General Purpose Ascii ManualPage 14 Appendix C. Driver Error MessagesError Description and Corrective Action This page Intentionally Left Blank