| Page 7 of 15 |
4.2.Client Side Connection Descriptions
| Section Title |
|
|
|
| Connections |
|
|
|
| Column Title | Function |
| Legal Values |
| Port | Specify which port the device is connected | ||
|
| to the FieldServer |
|
|
| Protocol | Specify protocol used | ASCII |
|
| Baud* | Specify baud rate | 110 – | 115200, standard |
| baud rates only | |||
|
|
| ||
| Parity* | Specify parity | Even, | Odd, None, Mark, |
| Space |
| ||
|
|
|
| |
| Data_Bits* | Specify data bits | 7, 8 |
|
| Stop_Bits* | Specify stop bits | 1 |
|
| Handshaking* | Specify hardware handshaking | RTS, RTS/CTS, None | |
Example
//Client Side Connections
Connections
Port, | Protocol, | Baud, | Parity, |
P8, | ASCII, | 9600, | None, |
1Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)