![](/images/new-backgrounds/1268138/26813843x1.webp)
| Page 22 of 31 |
This example illustrates a Map Descriptor which reads a table and dumps the response in ASCII format to the error log. The error log can be dumped to a file on your computer using RUIDEBUG (Refer to FieldServer Utilities Manual)
Data_Arrays |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Data_Array_Name, | Data_Format, | Data_Array_Length |
|
|
|
|
|
|
|
|
| ||||
DA_DUMP | , | BYTE | , | 2000 |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ||||||
Map_Descriptor_Name, | Data_Array_Name, | Data_Array_Offset, | Function, | Node_Name, | Length, | Scan_Interval, | Table_Name, | Field_Name , | Store_As | ||||||
Md1 |
| , | DA_DUMP | , | 0 | , | rdbc , | FAN01 , | 1000 , | 5.0s | , | DISPLAY , | EVERYTHING, | AsciiLog |
The following fragment from the error log is typical of the response to a Map Descriptor like the one above.
Ascii Dump Requested for MD=<Md1> Table=<DISPLAY>
DEV 02 DISPLAY
Desired Mode | Off |
| MODE |
|
Equipment Status | NORMAL |
| ALARM |
|
Controlling Setpoint | 75.0 | dF | CSPT | These are variable names. |
Controlling Temperature | dF | SPT | Use these names in your | |
Space Temperature | dF | RAT | Map Descriptors. | |
|
|
|
|
|
Supply Air Temperature | dF | SAT |
| |
Fan Mode | Off |
| FANSTAT |
|
Cooling Capacity | 0.0 | % | CCAP |
|
|
|
|
|
|
Heating Capacity | 0.0 | % | HCAP |
|
Variable descriptions.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)