|
| Page 7 of 31 | |
| Example |
|
|
|
|
|
|
| // Data Arrays |
|
|
|
|
|
|
| Data_Arrays |
|
|
| Data_Array_Name, | Data_Format, | Data_Array_Length |
| DA_AI_01, | UInt16, | 200 |
| DA_AO_01, | UInt16, | 200 |
| DA_DI_01, | Bit, | 200 |
| DA_DO_01, | Bit, | 200 |
4.2.Client Side Connection Descriptions
Section Title |
|
| |
Connections |
|
| |
Column Title | Function | Legal Values | |
Port | Specify which port the device is connected to the | ||
| FieldServer |
| |
|
| 300, 600 , 1200, | |
Baud* | Specify baud rate | 2400, 9600 (Vendor | |
|
| limitation) | |
Parity* | Specify parity. | None (Vendor | |
Limitation) | |||
|
| ||
Data_Bits* | Specify data bits | 8 (Vendor Limitation) | |
|
|
| |
Stop_Bits* | Specify stop bits | 1 (Vendor limitation) | |
|
|
| |
Protocol | Specify protocol used | CarrrierDL | |
|
|
| |
Handshaking* | Specify hardware handshaking | None | |
Poll _Delay* | Time between internal polls | ||
second | |||
|
| ||
Timeout* | When reading entire tables it is recommended that | 0.1 to 60.0 seconds, | |
the timeout be set to between 15 and 30 seconds. | |||
2.0seconds | |||
| Additional information is provided in Appendix A.5 | ||
|
| ||
IC_Timeout* | When reading entire tables it is recommended that |
| |
the ic_timeout be set to approx 15.0 seconds. |
| ||
| Additional information is provided in Appendix A.5 |
|
Example
//Client Side Connections
Connections
Port, | Baud, | Parity, | Data_bits, | Stop_Bits, | Protocol, | Handshaking, | Poll_Delay | ||
P8, | 9600, | None, | 8 , | 1 | , | CarrierDL, | None | , | 0.100s |
1Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)