| Page 5 of 31 |
3.Hardware Connections
The FieldServer is connected to the Carrier DataLink device as shown below. Ensure that the device to be connected to is in fact the DataLink device and not the DataPort device which is similar looking.
Configure the DataLink Device according to manufacturer’s instructions. This driver requires that the DataLink device’s DTPCONFIG table has been configured prior to connection with a FieldServer. Consult the manufacturer’s information on connecting Carrier Device’s to CCN network.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)